Gayn Winters wrote:
-----Original Message-----
From: Alex Zbyslaw [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 14, 2005 1:59 AM
To: [EMAIL PROTECTED]
Cc: [email protected]
Subject: Re: Fixing a MBR (and more) that ??? trashed
Gayn Winters wrote:
Alex Zbyslaw [mailto:[EMAIL PROTECTED]
Why do you think it's not safe to add hard drives?
It doesn't seem "safe" if Windows blows away the multiboot MBR that
FreeBSD so carefully made! Windows overwriting the MBR
seems to be the reason people recommend loading Windows before loading
FreeBSD, which I do. I just never realized that this problem would
come back
to bite me when I added another disk drive.
I know of know reason why it should. I've added disks half a dozen
times without blowing away any MBRs. Even the Windows blowing away
the
MBR is an annoyance, not a disaster since it is easy to rewrite.
Whatever pickle you find yourself in seems to have to do with
more than just adding a disk or Windows killing your MBR.
--Alex
I certainly am willing to admit that I'm doing something stupid!
The motherboard and its BIOS are also known to be strange.
One thing to note is that if I reconfigure (fresh FBSD install), add
hardware, and then boot first into FBSD, all is well EXCEPT the boot
loader, whose prompt is:
F1 ???
F2 FreeBSD
F5 Drive 1
Default: F2
If I select F2, then I get FreeBSD. If I select F5 I get Windows! I.e.
F5 gives me the same slice as does F1!!! (Drive1 is the extra IDE
drive.) I can't blame Windows for this, since it never got booted.
Also, if FBSD gets booted first, Windows doesn't (further) corrupt the
MBR. Incidentally, rewriting the MBR with
boot0cfg -B -o packet /dev/ad1
does not change anything. The F5 option is still there, and it still
brings up the Windows that is on slice1. If I add a third IDE drive,
the situation also remains the same. In particular, I don't get an F9
option.
I know too little about your setup. Are you sure ad1 is your second
disk? (There's nothing to stop you booting from any disk whatsoever if
you BIOS allows, and many do). When you boot off F2, what does say df show?
If you had a FreeBSD MBR on the second disk, then you *ought* to get
another F1, F2 etc menu. If you have a third disk, then the second disk
would also have an F5 option e.g.
DISK1 DISK2 DISK3
F5->DISK2 F5->DISK3 F5->DISK1
There's never anything higher than F5 since there can never be more than
4 slices on a disk (F1-F4), plus F5 for the next disk (if any).
--Alex
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
