On Fri, Jul 29, 2005 at 09:18:07PM +0200, Erik N??rgaard wrote: > Following the instruction I run as root: > # sane-find-scanner -q > found USB scanner (vendor=0x04b8 [EPSON], product=0x0121 [EPSON > Scanner]) at libusb:/dev/usb0:/dev/ugen0 > # scanimage -L > device `snapscan:libusb:/dev/usb0:/dev/ugen0' is a EPSON EPSON > Scanner flatbed scanner > > And I have even succesfully scanned the warranty in pnm. > > Then as ordinary user: > $ sane-find-scanner -q > found USB scanner (vendor=0x04b8 [EPSON], product=0x0121 [EPSON > Scanner]) at libusb:/dev/usb0:/dev/ugen0 > $ scanimage -L > > No scanners were identified. If you were expecting something > different, check that the scanner is plugged in, turned on and > detected by the sane-find-scanner tool (if appropriate). Please > read the documentation which came with this software (README, FAQ, > manpages).
This is normally a problem with permissions. You could set them to 0666 in /etc/devfs.conf, and [re]start devfs with # /etc/rc.d/devfs start Then try using scanimage again as ordinary user. > $ scanimage -d libusb:/dev/usb0:/dev/ugen0 > scanimage: open of device libusb:/dev/usb0:/dev/ugen0 failed: > Invalid argument Cheers, -cpghost. -- Cordula's Web. http://www.cordula.ws/ _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
