On Monday 25 July 2005 15:38, John Brooks wrote: > > I've recently switched from a Netgear router to use pppOe for my public > > internet ip on FreeBSD 5.4. > > > > My machine has two nics: bge0 and re0, both of which support 1000baseTX > > configurations, however neither of the two seem to be able to > > connect when I > > configure them in /etc/rc.conf. Here's what works: > > correct me if this is a wrong assumption, this is a dsl line?? > > what do you expect to gain here? forcing 1000baseTX on the NIC won't > speed up the dsl line. > _______________________________________________ Is there any speed advatage possible beyond the (10baseT/UTP)? If not then I guess it doesn't matter.
The dsl modem is on bge0, which ifconfig reports as bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet6 fe80::211:11ff:febd:be3a%bge0 prefixlen 64 scopeid 0x1 ether 00:11:11:bd:be:3a media: Ethernet autoselect (10baseT/UTP) My expectation (hope) is to change the "10base" in the media: line to "100base" or "1000base" to gain any throughput advantage that is possible. The internal network is on re0, which ifconfig reports as re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::240:f4ff:feb4:841a%re0 prefixlen 64 scopeid 0x2 ether 00:40:f4:b4:84:1a media: Ethernet autoselect (100baseTX <full-duplex>) status: active I'd like the change the "100base" in the media: line to a "1000base", if possible. thanks for your eyes! lane _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
