Thanks for your help. I will have to wait untill I get home to fix the problem (I am at work now). I will let you know how I make out.
Thanks Again A On 7/15/05, nawcom <[EMAIL PROTECTED]> wrote: > ok from what ive figured out is that kernel option WITH_LEGACY_GPU_SUPPORT > is highly unsupported for the 5.x kernel > > http://www.freebsd.org/cgi/cvsweb.cgi/~checkout~/ports/x11/nvidia-driver/Makefile?rev=1.34&content-type=text/plain > > my usual suggestion is to use the driver from nvidia.com, nvidia is very > friendly to the open source community - so they have drivers for > freebsd. ive used it myself and agp support works great. > > now - for actually getting back into your system: > > do you have a back up kernel handy in your operating system? > > i know depending on how things are orginally set up when you install a > new kernel > the makefile copies the original kernel folder (/boot/kernel) to > /boot/kernel.old and > /boot/kernel is replaced with the new one. > > when you boot up freebsd and you get to the boot screen - select option > number 6. then > enter the following commands: > >unload > >load /boot/kernel.old/kernel > >boot > > let me know if you make it into the OS and if you do - be sure and > remove that nvidia option! > ok i hope this help let me know of your status. > -Ben > > > > > Adam Stroud wrote: > > >All: > > > >I updated my nvidia drivers from the ports collection (Using the > >WITH_LEGACY_GPU_SUPPORT option to add support for my GeFroce2 GTS). > >During the upgrade process, my machine rebooted on it's own and now > >when I boot I get the following error message: > > > >FreeBSD 5.4-STABLE #0: Fri Jun 24 23:25:37 EDT 2005 > >[EMAIL PROTECTED]:/usr/obj/usr/src/sys/APS_KERN i386 > > > >kernel trap 18 with interrupts disabled > > > >fatal trap 18: integer divide fault while in kernel mode > > > >instruction pointer = 0x8:0xc689f8c > >stack pointer = 0x10:0xc1020c88 > >frame pointer = 0x10:0xc1020c9c > >code segment = base 0x0, 0xfffff, type 0x1b > > = DPL 0, pres 1, def32 1, gran 1 > >processor eflags = resume, IOPL=0 > >current process = 0 () > >trap number = 18 > >panic: integer divide fault > >uptime: 1s > > > >Anyone have any ideas? > > > >A > > > > > > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
