On 7/1/05, Bryan Maynard <[EMAIL PROTECTED]> wrote: > I read through your kernel - very nice comments, thanks a lot! > > I compiled the kernel and boot-up is noticably faster, thanks again! > > I would like to investigate transfering all the device info from boot -v to > LATITUDE_C600.hints. I don't really know what most of the info from boot -v > means, I'd like to work on figuring it out. Maybe you could help me learn and > we could > figure it out together? > > Any help you could give you be greatly appreciated! > > One thing of note: I don't have any sound. I've never had sound, but after > booting > with the new kernel I went into KDE's control panel and tested the sound > system, but > nothing came out. I didn't get any errors when it restarted the sound system > so I'm > not sure what's up.
Your using the wrong driver. the one you want is snd_maestro3. Add this to your loader.conf file: #sound_load="YES" #PCM Sound Support #snd_driver_load="YES" # Loads every sound drivers it can find snd_maestro3="YES" # Your driver hw.snd.maxautovchans=4 #sets up up to 4 virtual audio channels on demand #hw.snd.targetirqrate=36 # read the sound man page #hint.pcm.0.buffersize="16384" #read the sound man page After you do that reboot and retest it. first thing is to check dmesg. dmesg|grep -i pcm and do the same for ess and maestro, you should see that it was detected. also you should try 'cat /dev/sndstat'. fire up X and well, anyways.... if everything is working put the driver in the kernel config file and comment it out in loader.conf. I'll see what I can do about your other questions later, right now I need a smoke and have work to do. > > I've incuded the dmesg output from the new kernel boot in case you need to > look at it > along with my current CUSTOM.hints file (maybe it'll help. . . :-?) > > Anyway, thanks a lot for the new kernel, it works like a charm! > > Bryan > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
