Actually, I have a similar issue on a Pentium 4 box that's supposedly HT:
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2410.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
By the fact that HTT is there in the features, I'm assuming that HT
support is actually present. Though when I compile my kernel with SMP
support, it doesn't show up. I've had the box checked in the BIOS for HT
settings, but apparently there are none.
Any ideas?
Kirk Strauser wrote:
I'm running a 5.4-STABLE system (updated as of May 16). My kernel is
basically GENERIC with a few small tweaks, like commenting out extraneous
"cpu" lines and adding "options SMP".
My problem is that although dmesg shows every sign of having launched both
logical CPUs:
$ dmesg | grep -i cpu
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.05-MHz 686-class CPU)
Hyperthreading: 2 logical CPUs
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
SMP: AP CPU #1 Launched!
... running "top" only shows "0" in the CPU column for every task. I don't
see anything out of place in sysctl:
$ sysctl -a | grep -i hlt
machdep.cpu_idle_hlt: 1
machdep.hlt_cpus: 2
machdep.hlt_logical_cpus: 0
and /boot/loader.conf is all but empty. Honestly, I don't really know how
long this has been going on. top used to show both 0 and 1 in the C column
and I'm not exactly sure when it stopped. Any ideas?
--
Jonathan M. Slivko - [EMAIL PROTECTED]
"Linux: The Choice for the GNU Generation"
- http://www.linux.org/ -
Don't fear the penguin.
.^.
/V\
/( )\
^^-^^
He's here to help.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
