Has anyone seen these sorts of errors when compiling applications
(such as PHP or Apache2)? I can buildworld, kernels and most of the
ports.. but occasionally I run in to this error:
/usr/lib/crt1.o(.text+0x64): In function `_start':
: undefined reference to `_init_tls'
Here's the dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #5: Wed Apr 6 08:31:13 EDT 2005
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/saturn
mptable_probe: MP Config Table has bad signature: 4\^C\^_
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) processor (1331.32-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 1610547200 (1535 MB)
avail memory = 1572741120 (1499 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.1.INTA
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe1ffffff at
device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <network, ethernet> at device 4.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9400-0x947f mem
0xe8004000-0xe800407f irq 12 at device 10.0 on pci1
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:db:44:4e
atapci0: <SiI 3112 SATA150 controller> port
0xa800-0xa80f,0xa400-0xa403,0xa000-0xa007,0x9c00-0x9c03,0x9800-0x9807
mem
0xe8005000-0xe80051ff irq 11 at device 11.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <nVidia nForce2 UDMA133 controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on
pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib2
$PIR: ROUTE_INTERRUPT failed.
pci3: <display, VGA> at device 0.0 (no driver attached)
orm0: <ISA Option ROMs> at iomem
0xcd000-0xcd7ff,0xcc000-0xccfff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 1331323578 Hz quality 800
Timecounters tick every 10.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 19073MB <WDC WD200BB-75CAA0/16.06V16> [38752/16/63] at ata0-master UDMA33
acd0: CDROM <CREATIVE CD5233E/C1.00> at ata0-slave PIO4
ad2: 114472MB <ST3120023A/3.33> [232578/16/63] at ata1-master UDMA100
Mounting root from ufs:/dev/ad0s1a
--
Best wishes,
Alexander G. Chamandy
Webmaster
www.bsdfreak.org
Your Source For BSD News!
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
