Hi List
I've got Subj and FreeBSD-5.4PRE on it. But RAID0 is too slow:
[EMAIL PROTECTED]:eugene# dd if=/dev/zero of=/var/tmp/1 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 31.949508 secs (3281979 bytes/sec)
Also what does the following mean?
Interrupt storm detected on "irq16: bge0 bge1+"; throttling interrupt
Kernel boot messages:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #3: Wed Apr 6 17:46:08 MSD 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BETA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 3221016576 (3071 MB)
avail memory = 3153862656 (3007 MB)
ACPI APIC Table: <IBM SERONYXP>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 6
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM SERONYXP> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib3
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem
0xcffe0000-0xcffeffff,0xcfff0000-0xcfffffff irq 28 at device 1.0 on pci4
pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci3
pci5: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib5
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4001> mem
0xcdff0000-0xcdffffff irq 16 at device 0.0 on pci6
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0d:60:9a:8d:08
pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib6
bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4001> mem
0xcbff0000-0xcbffffff irq 16 at device 0.0 on pci7
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:0d:60:9a:8d:09
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2200-0x221f irq
16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2600-0x261f irq
19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0000000-0xf00003ff irq 23
at device 29.7 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
drm0: <ATI Radeon QY RV100 7000/VE> port 0x3000-0x30ff mem
0xdfff0000-0xdfffffff,0xd0000000-0xd7ffffff irq 16 at device 1.0 on pci1
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port
0x480-0x48f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x440-0x45f irq 17 at
device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: unable to set the command byte.
kbd0 at atkbd0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xcb000-0xcefff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
to accept, logging limited to 100 packets/entry by default
acd0: DVDROM <DV-18E/2.0D> at ata0-master UDMA33
Waiting 8 seconds for SCSI devices to settle
Interrupt storm detected on "irq16: bge0 bge1+"; throttling interrupt
source
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pt0 at mpt0 bus 0 target 8 lun 0
pt0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
pt0: 3.300MB/s transfers
da0 at mpt0 bus 0 target 0 lun 0
da0: <LSILOGIC 1030 IM IM 1000> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 34678MB (71020544 512 byte sectors: 255H 63S/T 4420C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
Best regards
--
EMIT-RIPN, EVM7-RIPE
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
