On Wed, 2002-11-20 at 23:13, Andy Sparrow wrote: > > yeah, i have BIOS in AUTO, I was able to boot to the harddrive with a > > cdrom by using 0:da(0,a)/kernel, but the harddrive's boot0 booter > > couldn't boot it on its own. > > > > Since I can boot to it, the BIOS should have correct setting for the > > drive right? > > IME, it's entirely possible for FreeBSD to have a bogus idea of the > geometry which prevents booting from the drive (the last 5-6 large > drives I've set up on machines with old BIOS'es have done this if I > don't create an M$DOS partition from M$ FDISK first - you can even > delete it in 'sysinstall', it just forces the correct geometry when the > disk is read in 'sysinstall', IIUC), but you can load the boot stuff > just fine from (e.g.) CD-ROM and then boot the kernel off the drive... > > I presume that this is because the BIOS can boot the CD, and the > CD-loaded boot stuff has the same bogus idea of the geometry, and can > then load the kernel
That makes sense. > > However, if you have /ever/ booted FreeBSD directly from this HDD, then > this probably isn't what happened (the geometry shouldn't change, and it > was valid once). and Yes, before I swapped drives, I was able to boot FreeBSD without any problems. > For some reason, some part of the boot stuff got lunched, and you > probably just need to re-write it. My firewall box did this once after a > power-cycle, I have no idea why. Right, I think the power management stuff might've screwed up the MBR. I tried rewriting it with boot0cfg per suggestions by Giorgos Keramidas, but no luck. > I don't recall what I did to get around this now, it was either > > disklabel -B da0s1 auto > > or > boot0cfg -d 0x80 > > or something like that... 'man boot' would be a good place to start. :-) > > Disclaimer: it's your disk, not mine. Take appropriate precautions, > including treating the above advice with some caution (I think I was on > 4.4-STABLE when I did the above, but it *was* some time ago)... > > In particular, if I were in your position, I think I'd be inclined to > wait and see if someone chimes in with a response of > "NNNNNNOOOOOOOO!!!!!!!!!" to the above advice :-> Yeah, I booted it off with a CDROM, and I dont reboot my laptop very often, so it's not that bad (not like it's a server or anything). I hoping one of you guys would know what to do. I'm wondering if I can just get rid of the booter, I only have one OS on my FreeBSD drive, so it doesn't really make sense to have a booter with only one option, I don't know, but when I had NetBSD I didn't even have a booter. How do I get right of boot0? -- andrew y ng <[EMAIL PROTECTED]> http://andrewng.com fingerprint : 46a1 29ff 893a 0381 dc81 1e1e bed8 e882 9bfc 594c
signature.asc
Description: This is a digitally signed message part
