well you could simply do an ipfw flush and then use ipfw command line to add back the rule for the loopback device and the natd divert line (looks like your using natd?), then do a:

ipfw add pass all from any to any

and make sure that you can send and recive traffic in both directions without any deny firewall rules in place.

If you want to test with the current rules in place, you may want to add a line to log all connections, if you have the disk space for it and then tail -f your security log and see what packets are getting denied/accepted and why.

David



Terrac Skiens wrote:

since this is a super small distribution I do not have the default open,
closed, and client firewall configs. The set I am using is based on the
client one though, however I adjusted it to allow traffic from the inside
to the outside on specific ports and hopefully keep-state to let the
returning packets back in. Thats right isn't it?

-terrac

On Tue, 5 Nov 2002, David Cramblett wrote:


Do you have gateway_enable="YES" in your firewall?

Can you get packets through both directions just fine with the firewall
set to "OPEN"?

David


Terrac Skiens wrote:


Hi there,

I have been trying to set up an embedded system from soekris, running a
small version of freebsd on it's internal compact flash hard disk.

The machine is built, I have remote access to it and I intend to use it
as a firewall + nat appliance. Directing traffic from machines internally
to external IP addresses.

I have gotten everything running, however my test for the machines
behind the new firewall keep failing. I can ping the firewall itself, but
not anything past it. The pings just dissapear. From the firewall I can
ping anythign by either hostname or IP.

What I have not figured out is why my machines behind the firewall cannot
ping out past the firewall, or get any other traffic out either.

my ipfw list is:
---------------------------------------
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
00400 deny ip from any to 172.16.0.0/12 via sis0
00500 deny ip from any to 192.168.0.0/16 via sis0
00600 deny ip from any to 0.0.0.0/8 via sis0
00700 deny ip from any to 169.254.0.0/16 via sis0
00800 deny ip from any to 192.0.2.0/24 via sis0
00900 deny ip from any to 224.0.0.0/4 via sis0
01000 deny ip from any to 240.0.0.0/4 via sis0
01100 divert 8668 ip from any to any via sis0
01200 deny ip from 172.16.0.0/12 to any via sis0
01300 deny ip from 192.168.0.0/16 to any via sis0
01400 deny ip from 0.0.0.0/8 to any via sis0
01500 deny ip from 169.254.0.0/16 to any via sis0
01600 deny ip from 192.0.2.0/24 to any via sis0
01700 deny ip from 224.0.0.0/4 to any via sis0
01800 deny ip from 240.0.0.0/4 to any via sis0
01900 allow tcp from any to any established
02000 allow ip from any to any frag
10000 deny log logamount 100 tcp from any to any in recv sis0 setup
10100 allow tcp from any to any setup
10200 allow udp from any to any 53 keep-state out xmit sis0
10300 allow udp from any to any 53 keep-state in recv sis0
10400 allow udp from any to any 123 keep-state out xmit sis0
10500 allow udp from any to any 123 keep-state in recv sis1
10600 allow tcp from any to any 53 keep-state out xmit sis0
10700 allow tcp from any to any 53 keep-state in recv sis1
10800 allow tcp from any to any 25 keep-state out xmit sis0
10900 allow tcp from any to any 25 keep-state in recv sis1
11000 allow tcp from any to any 22 keep-state out xmit sis0
11100 allow tcp from any to any 22 keep-state in recv sis1
11200 allow udp from me to any 67 keep-state out xmit sis0
11300 allow icmp from any to any
65535 deny ip from any to any

and my netstat -rn is:
---------------------------------------
Routing table:
--------------
Destination Gateway Flags Netif Use
default 66.180.229.177 UGSc sis0 2
10.1.1.0/24 link#2 UC sis1 0
xxx.xxx.xxx.xxx link#1 UC sis0 0 <- network
xxx.xxx.xxx.xxx link#1 UHLW sis0 0 <- gateway
127.0.0.1 127.0.0.1 UH lo0 0




To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message





To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message


Reply via email to