I've been searching the mailing lists and a few websites and run into what feels like a dead-end.
>From the Handbook, I gleaned that I need to use cdrecord to burn CDs. >From some previous messages about USB scanners and cameras, I found out that I need to make sure that SCSI and USB drivers are enabled in my kernel configuration, and that usbd_enable="YES" needs to be in /etc/rc.conf. So now, with the options enabled in my kernel, usbd running, and after a fresh MAKEDEV all to make sure the devices are all properly built, I'm in the following situation: from /var/log/messages: Oct 1 13:03:44 mumble /kernel: ugen0: vendor 0x1189 USB Optical Storage Device, rev 1.00/a.03, addr 2 [root@mumble /root]$ cdrecord -scanbus Cdrecord 1.11a28 (i386-unknown-freebsd4.6) Copyright (C) 1995-2002 Jörg Schilling cdrecord: No such file or directory. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. So I'm wondering, what does this mean? I made sure that the SCSI system was enabled in the kernel configuration, but is there something else that needs to be done? Or is this message not really indicative of a problem with the SCSI system? Thanks for any help, Steve To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
