Greetings, Restarting the FreeCAD 0.17 discussion on a different tangent.
As I mentioned before I am building (for now) outside of the ports tree FreeCAD-git + Coin-hg + QT5 + med-4.0.0. I want to particularly thank very much all the porting work that has been done so far, I wouldn't have been able to get as far as I have without it. french/med (french?) requires fortran, and for ports gfortran is apparently the only option. gfortran depends on libgcc_s.so.1, which is FreeBSD's (only?) version of dll hell. Transcribed output from the FreeCAD Testing Framework GUI test all: First run of TestApp.All: Run: 212 Failures: 1 Errors: 20 which isn't bad at all I suspect. However one of the failures is /lib/libgcc_s.so.1 version GCC_4.8.0 required by /usr/local/lib/gcc8/libgfortran.so.5 not found This is probably fatal to practical use of FreeCAD on FreeBSD. I was able to open most of my previous models, created on debian-testing, but some were fail. 2 threads, no happy ending: https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113336.html https://lists.freebsd.org/pipermail/freebsd-python/2016-January/009672.html Question to experienced porters, how is this best practice solved? Thanks, Russell _______________________________________________ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
