Am 08.09.2014 um 19:35 schrieb Janos Dohanics: > On Mon, 08 Sep 2014 17:57:51 +0200 > Matthias Andree <matthias.and...@gmx.de> wrote: > >> Am 07.09.2014 um 17:36 schrieb Janos Dohanics: >> >>> [...] >> >> Janos, >> >> tl;dr: running "make clean && make install clean" should fix it. >> >> The changes to the port need you to go through all the build phases >> again, which may be a bit inconvenient on slow/loaded computers, but >> otherwise changes like USE_BINUTILS are not picked up. >> >> Tech background: ntop uses GNU configure, which records the state of >> several variables in its generated files (Makefile in particular), and >> the FreeBSD ports framework avoids re-running configure unless you >> "make clean". libtool has been running "strip", not >> "/usr/local/bin/strip", as a consequence. >> >> Hope that helps. >> >> Best regards, >> Matthias > > Matthias, > > Thank you for your patience and explanation. > > I did "make clean" and then "make install clean", but ended up with the > same error. I posted the entire build at > http://wwwr.3dresearch.com/psa/ntop_build if that might give any clues. >
Janos, now that makes me scratch my head a bit, because I have built it on redports successfully, but I also see that it is just using the bare "strip" command, not one qualified with path. <https://redports.org/~mandree/20140905211100-64558-241129/ntop-5.0.1_9.log> Can you try something? In the port's Makefile, add CONFIGURE_ARGS+= STRIP=${LOCALBASE}/bin/strip right underneath the USE_BINUTILS= yes line. Let me know if that works. I have also committed this as r367688, so it should be available through portsnap and SVN mirrors soon. You can see that you have it from the $FreeBSD: line, it should now read $FreeBSD: head/net/ntop/Makefile 367688 2014-09-08 19:52:22Z mandree $ If it still fails, please post the build log and your /etc/src.conf and /etc/make.conf. Thanks for your indulgence. Best regards, Matthias _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
