Am 28.12.2013 um 06:13 schrieb Cy Schubert <cy.schub...@komquats.com>:
> In message <c06d904b-36fa-4c54-ad47-4cb737a34...@lassitu.de>, Stefan Bethke
> wri
> tes:
>>
>> --Apple-Mail=_6EEA81A7-5FCB-41CB-A6F5-4CBEDAB3BBAE
>> Content-Transfer-Encoding: quoted-printable
>> Content-Type: text/plain;
>> charset=us-ascii
>>
>> On both 9-stable and 10-stable
>>
>> Dec 26 13:02:04 lokschuppen ntpd[5270]: ntpd 4.2.7p364@1.2483-o Thu Dec =
>> 26 12:55:22 UTC 2013 (1): Starting
>> Dec 26 13:02:04 lokschuppen ntpd[5270]: Command line: =
>> /usr/local/sbin/ntpd -c /etc/ntp.conf -p /var/run/ntpd.pid -f =
>> /var/db/ntpd.drift
>> Dec 26 13:02:05 lokschuppen kernel: pid 5271 (ntpd), uid 0: exited on =
>> signal 11 (core dumped)
>
> p404 has just been committed. Let's see if it makes a difference.
>
> Let me know what uname -a shows and any options/optional modules compiled
> or loaded.
That seems to have done the trick, thank you!
The problem occurred on both
FreeBSD diesel.lassitu.de 10.0-PRERELEASE FreeBSD 10.0-PRERELEASE #5 r259696:
Sun Dec 22 00:13:23 CET 2013
r...@diesel.lassitu.de:/usr/obj/var/freebsd/10-stable/sys/DIESEL amd64
and
FreeBSD lokschuppen.zs64.net 9.2-PRERELEASE FreeBSD 9.2-PRERELEASE #2 r255602:
Sun Sep 15 21:25:57 UTC 2013
r...@lokschuppen.zs64.net:/usr/obj/freebsd/checkout/src/sys/EISENBOOT amd64
with defaults for the port:
# make showconfig
===> The following configuration options are available for ntp-devel-4.2.7p404:
ACTS=off: Enable ACTS modem service
ARBITER=off: Enable Arbiter 1088A/B GPS receiver
ARCRON_MSF=off: Enable Arcron MSF receiver
AS2201=off: Enable Austron 2200A/2201A GPS receiver
ATOM=on: Enable ATOM PPS interface
AUDIO_CHU=off: Enable CHU audio/decoder
BANCOMM=off: Enable Datum/Bancomm bc635/VME interface
CHRONOLOG=off: Enable Chrono-log K-series WWVB receiver
CHU=off: Enable CHU modem/decoder
COMPUTIME=off: Enable Diem Computime Radio Clock
DATUM=off: Enable Datum Programmable Time System
DCF7000=off: Enable ELV/DCF7000 clock
DUMBCLOCK=off: Enable Dumb generic hh:mm:ss local clock
FG=off: Enable Forum Graphic GPS
GPSVME=off: Enable TrueTime GPS receiver/VME interface
HEATH=off: Enable Heath GC-1000 WWV/WWVH receiver
HOPF6021=off: Enable HOPF 6021 clock
HOPFPCI=off: Enable hopf 6039 PCI board
HOPFSERIAL=off: Enable hopf serial clock device
HPGPS=off: Enable HP 58503A GPS receiver
IPV6=on: IPv6 protocol support
IRIG=off: Enable IRIG audio decoder
JJY=off: Enable JJY receiver
JUPITER=off: Enable Rockwell Jupiter GPS receiver
LEITCH=off: Enable Leitch CSD 5300 Master Clock
LOCAL_CLOCK=off: Enable local clock reference
MEINBERG=off: Enable Meinberg clocks
MX4200=off: Enable Magnavox MX4200 GPS receiver
NEOCLOCK4X=off: Enable NeoClock4X DCF77 / TDF receiver
NMEA=on: Enable NMEA GPS receiver
NTPSNMPD=off: Build and install ntpsnmpd
NTP_SIGND=on: Enable signed NTP
ONCORE=off: Enable Motorola VP/UT Oncore GPS receiver
PALISADE=off: Enable Palisade clock
PCF=off: Enable Conrad parallel port radio clock
PST=off: Enable PST/Traconex 1020 WWV/WWVH receiver
RAWDCF=off: Enable DCF77 raw time code
RCC8000=off: Enable RCC 8000 clock
RIPENCC=off: Enable RIPENCC specific Trimble driver
SCHMID=off: Enable Schmid DCF77 clock
SEL240X=off: Enable SEL 240X clocks
SHM=off: Enable SHM clock attached thru shared memory
SPECTRACOM=off: Enable Spectracom 8170/Netclock/2 WWVB
SSL=on: SSL protocol support
TRIMTAIP=off: Enable Trimble GPS receiver/TAIP protocol
TRIMTSIP=off: Enable Trimble GPS receiver/TSIP protocol
TRUETIME=off: Enable Kinemetrics/TrueTime receivers
ULINK=off: Enable Ultralink WWVB receiver
VARITEXT=off: Enable VARITEXT clock
WHARTON=off: Enable WHARTON 400A Series clock
WWV=off: Enable WWV Audio receiver
ZYFER=off: Enable Zyfer GPStarplus receiver
===> Use 'make config' to modify these settings
--
Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811
signature.asc
Description: Message signed with OpenPGP using GPGMail
