This is another fresh install and I burned a new cd with the FreeBSD-9.0-RELEASE-i386-disc1 iso. ping worked. Other packages installed. xorg did not install.
If I set the PACKAGESITE I am able to pkg_add -r xorg without error, this is with the fresh install that has had no mods/changes done to it... I have never seen a problem like this before. Following is what I did after the installs first boot! $ su - Password: backroom# uname -a FreeBSD backroom.local.home 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 backroom# pkg_add -r tmux Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/tmux.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/libevent-1.4.14b_2.tbz... Done. backroom# pkg_add -r xorg Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/xorg.tbz: File unavailable (e.g., file not found, no access) pkg_add: unable to fetch ' ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/xorg.tbz' by URL backroom# pkg_add -r sudo Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/sudo.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/libiconv-1.14.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/gettext-0.18.1.1.tbz... Done. backroom# pkg_add -r nmap Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/nmap.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/pkg-config-0.25_1.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/lua-5.1.5_4.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/pcre-8.30_2.tbz... Done. backroom# pkg_add -r irssi Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/irssi.tbz... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/perl-5.14.2_2.tbz... Done. Removing stale symlinks from /usr/bin... Skipping /usr/bin/perl Skipping /usr/bin/perl5 Done. Creating various symlinks in /usr/bin... Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5 Done. Cleaning up /etc/make.conf... Done. Spamming /etc/make.conf... Done. Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/python27-2.7.3_2.tbz... Done. ==== Note that some of the standard modules are provided as separate ports since they require extra dependencies: bsddb databases/py-bsddb gdbm databases/py-gdbm sqlite3databases/py-sqlite3 tkinter x11-toolkits/py-tkinter Install them as needed. ==== Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/All/glib-2.28.8_4.tbz... Done. No schema files found: doing nothing. backroom# ping -c 4 www.google.com PING www.l.google.com (173.194.75.104): 56 data bytes 64 bytes from 173.194.75.104: icmp_seq=0 ttl=252 time=19.614 ms 64 bytes from 173.194.75.104: icmp_seq=1 ttl=252 time=20.787 ms 64 bytes from 173.194.75.104: icmp_seq=2 ttl=252 time=19.689 ms 64 bytes from 173.194.75.104: icmp_seq=3 ttl=252 time=21.159 ms --- www.l.google.com ping statistics --- 4 packets transmitted, 4 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 19.614/20.312/21.159/0.674 ms backroom# ping -c 4 www.yahoo.com PING ds-any-fp3-real.wa1.b.yahoo.com (98.139.183.24): 56 data bytes 64 bytes from 98.139.183.24: icmp_seq=0 ttl=51 time=52.125 ms 64 bytes from 98.139.183.24: icmp_seq=1 ttl=51 time=44.036 ms 64 bytes from 98.139.183.24: icmp_seq=2 ttl=50 time=70.516 ms 64 bytes from 98.139.183.24: icmp_seq=3 ttl=50 time=72.006 ms --- ds-any-fp3-real.wa1.b.yahoo.com ping statistics --- 4 packets transmitted, 4 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 44.036/59.671/72.006/11.949 ms $ ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> ether 00:21:9b:39:b2:6a inet 10.201.51.33 netmask 0xffffff00 broadcast 10.201.51.255 inet6 fe80::221:9bff:fe39:b26a%em0 prefixlen 64 scopeid 0x1 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (100baseTX <full-duplex>) status: active xl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=82009<RXCSUM,VLAN_MTU,WOL_MAGIC,LINKSTATE> ether 00:01:02:cc:ff:13 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (none) status: no carrier fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 02:00:d1:78:a9:1e nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> ch 1 dma -1 fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 lladdr 0.0.d1.0.81.78.a9.1e.a.2.ff.fe.0.0.0.0 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0xd inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Thanks Cody On Fri, Jul 20, 2012 at 12:53 PM, cody chandler <cody.a.chand...@gmail.com>wrote: > Hello Chris, > > Setting to the PACKAGESITE then retrying pkg_add -r xorg works.... I'm > confused on why it did work prior to yesterday.. This was the 5th fresh > installed from the same cd I've used now for about 30 installs. I'll burn > a new cd and reinstall and see if possibly the cd I am using has gone bad. > The last 5 installs, installed without problems but the pkg_add -r xorg > failed. Installs prior to the 5 never had an issue. Will burn the cd now > and test then send results. Thank you for getting to me so quickly. > > Thank you! > Cody > > > > > On Fri, Jul 20, 2012 at 12:38 PM, Chris Rees <cr...@freebsd.org> wrote: > >> On 20 July 2012 17:23, cody chandler <cody.a.chand...@gmail.com> wrote: >> > Hello, >> > >> > I have tried several times and reinstalled this system 5 times now. >> > pkg_add -r tmux works, pkg_add -r xdm works, pkg_add -r xorg fails. I'm >> > logged in as root and the first package I ty is the xorg. The system >> in a >> > i386, FBSD 9.0 -release. When I look at >> > >> ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/I >> > do not see a xorg.tbz and am under the impression there is no package >> for >> > xorg now? I followed the 6.3 of >> > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x11.html. >> > >> >> That means that a dependency of the port failed to build at the time >> of the release (which strikes me as odd-- I've copied erwin The i386 >> Package Guy to see if he knows) >> >> I'd try setting PACKAGESITE to >> ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9-stable/Latest/, >> that should help. >> >> If you're running csh: >> >> # setenv PACKAGESITE >> ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9-stable/Latest/ >> # pkg_add -r xorg >> >> Chris >> > > _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
