On Thu, Apr 12, 2012 at 10:15 PM, Jerry <je...@seibercom.net> wrote: > On Thu, 12 Apr 2012 20:28:06 +0200 > Torfinn Ingolfsen articulated: > >> After I upgraded net/samba35 to version 3.5.14, I noticed this: >> root@kg-quiet# service samba status >> Cannot 'status' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestatus' instead of 'status'. >> root@kg-quiet# service samba start >> Cannot 'start' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestart' instead of 'start'. >> >> What? Since when? >> Ok, let's try to explicit set winbindd_enable to NO then: >> root@kg-quiet# grep winbind /etc/rc.conf >> winbindd_enable="NO" >> >> root@kg-quiet# service samba status >> Cannot 'status' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestatus' instead of 'status'. >> root@kg-quiet# service samba start >> Cannot 'start' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestart' instead of 'start'. >> >> Well, that defeats the purpose of having winbindd_enable at all. >> Yes, my Samba is built with WINBIND=on, but still it shouldn't fail >> this way. Here is my options: >> root@kg-quiet# make showconfig >> ===> The following configuration options are available for >> samba35-3.5.14: LDAP=on "With LDAP support" >> ADS=off "With Active Directory support" >> CUPS=on "With CUPS printing support" >> WINBIND=on "With WinBIND support" >> SWAT=off "With SWAT WebGUI" >> ACL_SUPPORT=off "With ACL support" >> AIO_SUPPORT=on "With Asyncronous IO support" >> FAM_SUPPORT=off "With File Alteration Monitor" >> SYSLOG=off "With Syslog support" >> QUOTAS=off "With Disk quota support" >> UTMP=off "With UTMP accounting support" >> PAM_SMBPASS=off "With PAM authentication vs passdb backends" >> DNSUPDATE=off "With dynamic DNS update(require ADS)" >> AVAHI=off "With Bonjour service discovery support" >> EXP_MODULES=off "With experimental modules" >> POPT=on "With system-wide POPT library" >> IPV6=on "With IPv6 support" >> MAX_DEBUG=off "With maximum debugging" >> SMBTORTURE=off "With smbtorture" >> ===> Use 'make config' to modify these settings >> >> and my FreeBSD version: >> root@kg-quiet# uname -a >> FreeBSD kg-quiet.kg4.no 8.2-STABLE FreeBSD 8.2-STABLE #1: Sat Jan 7 >> 14:05:57 CET 2012 >> r...@kg-quiet.kg4.no:/usr/obj/usr/src/sys/GENERIC amd64 >> >> How do I fix it? > > I had a similar experience with Samba-3.4 recently. I entered the > "WINBINDD_ENABLED=YES" in the /etc/rc.conf file to get Samba working. > Since I don't need the "winbindd" service, I reconfigured the Samba > port to not build with it and then rebuilt the port.
But did you report that the port wasn't working as intended? > Personally, I believe that "WINBINDD" should be "OFF" by default; > however, it is easy enough to configure the port not to build with it. > I agree that it is easy to reconfigure and rebuild the port. But - the port still has a startup script that isn't working as intended; that is an error in the port. Such errors should be reported so that port maintainers so that errors might be corrected. Which is what I have done. -- Regards, Torfinn Ingolfsen _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
