On 06/10/2010 13:42, b. f. wrote:
You can set those knobs via the command line, or via Makefile.{inc,
${ARCH}*, ${OPSYS}, local}, or via make.conf, where you can limit the
scope based on the .CURDIR, etc. Although we do have a problem, as
you note in (4), with knobs that are OPTIONS, but are defined
somewhere other than OPTIONSFILE. I hadn't seen:
http://docs.freebsd.org/cgi/mid.cgi?4C476F69.1060200
until swell.k pointed it out (thanks). I think that it does some good
things, but it does have some problems:
--I don't think the priority is right: the "environment" settings
ought to override the PORTS_DBDIR entries. This is because they will
do so anyway in some circumstances (because of recursion, or the use
of make -e/-E, or because you can't .undef some "environment"
variables), but also because users may want to perform a test build
with knobs defined in the "environment", without having to alter their
settings in PORTS_DBDIR.
--The parsing of the config files needs to be changed, so that
_OPTION_SRC_${OPT} isn't set to "config" when it should be
"environment" (see above). Also, the entries in OPTIONSFILE.local
ought to override anything in OPTIONSFILE, without regard to
precedence of WITHOUT_*.
--There needs to be a final sanity-check, that fails with an
appropriate error message if both WITH_* and WITHOUT_* are defined,
because the .undefs are not sufficient to guarantee mutual
exclusivity.
I'm afraid I'm really in a position to look at this closely now, but I
think that the latest version (attached) might resolve some of the above
problems.
Kind regards,
Christopher Key
Index: Mk/bsd.port.mk
===================================================================
RCS file: /home/ncvs/ports/Mk/bsd.port.mk,v
retrieving revision 1.643
diff -u -r1.643 bsd.port.mk
--- Mk/bsd.port.mk 15 Jul 2010 14:48:50 -0000 1.643
+++ Mk/bsd.port.mk 26 Jul 2010 12:31:53 -0000
@@ -1291,43 +1291,124 @@
.endif
OPTIONSFILE?= ${PORT_DBDIR}/${UNIQUENAME}/options
.if defined(OPTIONS)
-# include OPTIONSFILE first if exists
+
+# Firstly, get a list of all options
+_OPTIONS_LIST=
+
+_FIELD= 0
+. for O in ${OPTIONS:C/".*"//}
+. if ${_FIELD} == 0
+_FIELD= 1
+_OPTIONS_LIST:= ${_OPTIONS_LIST} ${O}
+. else
+_FIELD= 0
+. endif
+. endfor
+. undef _FIELD
+
+# Get an on/off value for each option defined either in environment,
make.conf, ports.conf or on the command line
+# Attempt to undef the corresponding WITH_XXX, WITHOUT_XXX (we'll restore them
later) so that:
+# a) we can detect immutable options from the environment or command line
+# b) we can see what we read in
+. for OPT in ${_OPTIONS_LIST}
+. if defined(WITH_${OPT}) || defined(WITHOUT_${OPT})
+. if defined(WITHOUT_${OPT}) # always check WITHOUT_XXX before WITH_XXX
to give WITHOUT_XXX priority
+_OPTION_VAL_${OPT}= off
+. else
+_OPTION_VAL_${OPT}= on
+. endif
+_OPTION_SRC_${OPT}= site
+. undef WITH_${OPT}
+. undef WITHOUT_${OPT}
+. endif
+. endfor
+
+# Detect which variables we failed to undef. These will have been specified
on the command line, and will be
+# immutable. Check for duplicate WITH_XXX and WITHOUT_XXX, as we can't clean
these up for the port.
+# Otherwise, update the option value to give cmdline priority over make.conf,
ports.conf, and note that
+# this option is immutable, and cannot be overriden.
+. for OPT in ${_OPTIONS_LIST}
+. if defined(WITH_${OPT}) && defined(WITHOUT_${OPT})
+. error You set both WITH_${OPT} and WITHOUT_${OPT}. Abort.
+. elif defined(WITH_${OPT}) || defined(WITHOUT_${OPT})
+. if defined(WITHOUT_${OPT}) # always check WITHOUT_XXX before WITH_XXX
to give WITHOUT_XXX priority
+_OPTION_VAL_${OPT}= off
+. else
+_OPTION_VAL_${OPT}= on
+. endif
+_OPTION_SRC_${OPT}= env+args
+_OPTION_IMM_${OPT}= true
+. endif
+. endfor
+
+# Include OPTIONSFILE if exists
. if exists(${OPTIONSFILE}) && !make(rmconfig)
. include "${OPTIONSFILE}"
. endif
. if exists(${OPTIONSFILE}.local)
. include "${OPTIONSFILE}.local"
. endif
-WITHOUT:=
-WITH:=
-. if defined(OPTIONS)
-REALOPTIONS=${OPTIONS:C/".*"//g}
-. for O in ${REALOPTIONS}
-RO:=${O}
-. if ${RO:L} == off
-WITHOUT:= ${WITHOUT} ${OPT}
+
+# Update our list of option values based on what we read from our config file.
Only override the option
+# value if it isn't immutable, but always try to unset WITH_XXX and
WITHOUT_XXX. We'll restore them later,
+# ensuring that WITH_XXX and WITHOUT_XXX are mutually exclusive.
+. for OPT in ${_OPTIONS_LIST}
+. if defined(WITH_${OPT}) || defined(WITHOUT_${OPT})
+. if !defined(_OPTION_IMM_${OPT})
+. if defined(WITHOUT_${OPT}) # always check WITHOUT_XXX before WITH_XXX
to give WITHOUT_XXX priority
+_OPTION_VAL_${OPT}= off
+. else
+_OPTION_VAL_${OPT}= on
+. endif
+_OPTION_SRC_${OPT}= config
+. endif
+. undef WITH_${OPT}
+. undef WITHOUT_${OPT}
+. endif
+. endfor
+
+# Set default value for remaining options
+_FIELD= 0
+. for O in ${OPTIONS:C/".*"//}
+. if ${_FIELD} == 0
+_FIELD= 1
+OPT:= ${O}
+. else
+_FIELD= 0
+. if !defined(_OPTION_VAL_${OPT})
+_OPTION_VAL_${OPT}:= ${O:L}
+_OPTION_SRC_${OPT}= default
. endif
-. if ${RO:L} == on
-WITH:= ${WITH} ${OPT}
. endif
-OPT:=${RO}
. endfor
+. undef _FIELD
+. undef OPT
+
+# restore WITH_XXX, WITHOUT_XXX appropriately
+. for OPT in ${_OPTIONS_LIST}
+. if ${_OPTION_VAL_${OPT}} == on
+WITH_${OPT}= true
+. else
+WITHOUT_${OPT}= true
. endif
-# define only if NO WITH/WITHOUT_${W} is defined
-. for W in ${WITH}
-. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
-WITH_${W}:= true
-. endif
. endfor
-. for W in ${WITHOUT}
-. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
-WITHOUT_${W}:= true
-. endif
+
+# shell script to set variables for current option values
+_OPTIONS_SET_SH=
+. for OPT in ${_OPTIONS_LIST}
+_OPTIONS_SET_SH:= ${_OPTIONS_SET_SH} \
+
OPTION_SRC_${OPT}=${_OPTION_SRC_${OPT}}; \
+ OPTION_VAL_${OPT}=${_OPTION_VAL_${OPT}};
. endfor
-. undef WITH
-. undef WITHOUT
-. undef RO
-. undef REALOPTIONS
+
+# clean up
+. for OPT in ${_OPTIONS_LIST}
+. undef _OPTION_VAL_${OPT}
+. undef _OPTION_SRC_${OPT}
+. undef _OPTION_IMM_${OPT}
+. endfor
+. undef _OPTIONS_LIST
+
.endif
.endif
@@ -6102,24 +6183,11 @@
${MKDIR} $${optionsdir} 2> /dev/null) || \
(${ECHO_MSG} "===> Cannot create $${optionsdir}, check
permissions"; exit 1)
.endif
- -...@if [ -e ${OPTIONSFILE} ]; then \
- . ${OPTIONSFILE}; \
- fi; \
+ -...@${_options_set_sh} \
set -- ${OPTIONS} XXX; \
while [ $$# -gt 3 ]; do \
OPTIONSLIST="$${OPTIONSLIST} $$1"; \
- defaultval=$$3; \
- withvar=WITH_$$1; \
- withoutvar=WITHOUT_$$1; \
- withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
- withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
- if [ ! -z "$${withval}" ]; then \
- val=on; \
- elif [ ! -z "$${withoutval}" ]; then \
- val=off; \
- else \
- val=$$3; \
- fi; \
+ val=$$(eval ${ECHO_CMD} $$\{OPTION_VAL_$${1}\}); \
DEFOPTIONS="$${DEFOPTIONS} $$1 \"$$2\" $${val}"; \
shift 3; \
done; \
@@ -6176,21 +6244,11 @@
.if defined(OPTIONS)
.if exists(${OPTIONSFILE})
# scan saved options and invalidate them, if the set of options does not match
- @. ${OPTIONSFILE}; \
+ @${_OPTIONS_SET_SH} \
set ${OPTIONS} XXX; \
while [ $$# -gt 3 ]; do \
- withvar=WITH_$$1; \
- withoutvar=WITHOUT_$$1; \
- withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
- withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
- if [ ! -z "$${withval}" ]; then \
- val=on; \
- elif [ ! -z "$${withoutval}" ]; then \
- val=off; \
- else \
- val=missing; \
- fi; \
- if [ "$${val}" = "missing" ]; then \
+ src=$$(eval ${ECHO_CMD} $$\{OPTION_SRC_$${1}\}); \
+ if [ "$${src}" != "config" ]; then \
OPTIONS_INVALID=yes; \
fi; \
shift 3; \
@@ -6206,26 +6264,16 @@
.if !target(showconfig)
showconfig:
-.if defined(OPTIONS)
+.if !defined(OPTIONS)
+ @${ECHO_MSG} "===> No options to configure"
+.else
@${ECHO_MSG} "===> The following configuration options are available
for ${PKGNAME}:"
- -...@if [ -e ${OPTIONSFILE} ]; then \
- . ${OPTIONSFILE}; \
- fi; \
+ @${_OPTIONS_SET_SH} \
set -- ${OPTIONS} XXX; \
while [ $$# -gt 3 ]; do \
- defaultval=$$3; \
- withvar=WITH_$$1; \
- withoutvar=WITHOUT_$$1; \
- withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
- withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
- if [ ! -z "$${withval}" ]; then \
- val=on; \
- elif [ ! -z "$${withoutval}" ]; then \
- val=off; \
- else \
- val="$$3 (default)"; \
- fi; \
- ${ECHO_MSG} " $$1=$${val} \"$$2\""; \
+ val=$$(eval ${ECHO_CMD} $$\{OPTION_VAL_$${1}\}); \
+ src=$$(eval ${ECHO_CMD} $$\{OPTION_SRC_$${1}\}); \
+ ${ECHO_MSG} " $$1=$${val} ($${src}) \"$$2\""; \
shift 3; \
done
@${ECHO_MSG} "===> Use 'make config' to modify these settings"
_______________________________________________
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
