Anthony Agelastos wrote:
On Jul 16, 2006, at 11:19 PM, John Merryweather Cooper wrote:
Anthony Agelastos wrote:
On Jul 16, 2006, at 10:08 PM, John Merryweather Cooper wrote:
Anthony Agelastos wrote:
On Jul 16, 2006, at 3:19 PM, Doug Barton wrote:
For future reference, please don't post to both -ports and
-questions.
Thank you for this clarification.
Anthony Agelastos wrote:
Does anyone out there have network printing working with
hpijs/hplip and
CUPS 1.2.0?
Yes. You need to follow the instructions at
file:///usr/local/share/doc/hplip-0.9.11/install/step4/cups/net.html
I do not think I explained my situation very well. This printer
(hp LaserJet 1160Le) is connected directly to my FreeBSD server
via USB. If I print something logged on the server (via lp for
instance), it prints. I wish to print to this printer from all of
the computers on my LAN. When I try to print something from one of
these computers, that is when it bombs and displays the
foomatic-rip error message (foomatic-rip failed).
The directions on that sheet appear to be if I wanted to print to
this network printer that wasn't directly connected to the FreeBSD
server. Am I mistaken about this? Also, there is no button on the
printer that will print such a page, so I would have to figure out
how to find this IP address by other means. I cannot see how to
find it in the CUPS web interface. I assume CUPS issues it an IP
address.
The error_log that I have posted on previous threads is attached
to this email (the successful print jobs were done locally while
the error occurred when I printed to the printer from my MacBook
Pro). Does anyone have any suggestions? I should note that prior
to the CUPS upgrade to 1.2.0 (and the recent gnutls update), my
setup was working (I was able to print from the server itself as
well as all of the rest of the computers on my LAN). I have
rebuilt all packages several times (except for the OS).
On my MacBook Pro, when I go to the CUPS web interface, I see the
following for the printer:
[EMAIL PROTECTED] HP LaserJet 1160 Foomatic/hpijs
(recommended) Description: hp LaserJet 1160Le
Location: Den
Printer State: idle, accepting jobs.
192.168.0.3 is the IP address of my FreeBSD server on my LAN. It
looks as if Mac OS X 10.4.7 runs CUPS 1.1.23, but I could be
mistaken. It has found the printer through Bonjour (zeroconf I
believe is another name for it), so I didn't have to do any
configuring. Could there be an incompatibility within these
versions of CUPS? I have found the following page which lists
several issues and talks about how CUPS 1.2.0 is broken in several
places. Could one of these be the issue?
http://www.bsdforums.org/forums/showthread.php?t=42391
On a sidenote, I was having difficulties installing hpijs when
hplip was
already installed
I'm working on that.
Thank you for your assistance on this.
Doug
-- This .signature sanitized for your protection
------------------------------------------------------------------------
_______________________________________________
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
You need to restart CUPS when the printer "attaches" via USB or
else CUPS won't know about the USB port and you'll get this error
every time.
I just did a /usr/local/etc/rc.d/cupsd restart and then printed
something from my laptop. Same error.
dell# lpstat -t
scheduler is running
no system default destination
device for Create_PDF: cups-pdf:/
device for hp_LaserJet_1160Le: /dev/ulpt0
Create_PDF accepting requests since Sun Jun 25 11:27:52 2006
hp_LaserJet_1160Le accepting requests since Sun Jul 16 22:36:15 2006
printer Create_PDF is idle. enabled since Sun Jun 25 11:27:52 2006
printer hp_LaserJet_1160Le is idle. enabled since Sun Jul 16
22:36:15 2006
/usr/local/libexec/cups/filter/foomatic-rip failed
hp_LaserJet_1160Le-30 iqgrande 7168 Sun Jul 16 22:36:02
2006
jmc
What are the permissions/ownership on /dev/ulpt0?
jmc
%ls -l /dev/ulpt0
crw-rw---- 1 root cups 0, 68 Jul 16 22:36 /dev/ulpt0
Same as I have. CUPS works for me if I restart it after the USB printer
attaches. If I don't restart it, then I get the same error you're
reporting.
jmc
_______________________________________________
freebsd-ports@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
