Create another printer using a different name from the one you have right now and see if you can see it.
Anthony Agelastos <[EMAIL PROTECTED]> escreveu: On Jul 16, 2006, at 10:08 PM, John Merryweather Cooper wrote: > Anthony Agelastos wrote: >> On Jul 16, 2006, at 3:19 PM, Doug Barton wrote: >>> For future reference, please don't post to both -ports and - >>> questions. >> >> Thank you for this clarification. >> >>> Anthony Agelastos wrote: >>>> Does anyone out there have network printing working with hpijs/ >>>> hplip and >>>> CUPS 1.2.0? >>> >>> Yes. You need to follow the instructions at >>> file:///usr/local/share/doc/hplip-0.9.11/install/step4/cups/net.html >> >> I do not think I explained my situation very well. This printer >> (hp LaserJet 1160Le) is connected directly to my FreeBSD server >> via USB. If I print something logged on the server (via lp for >> instance), it prints. I wish to print to this printer from all of >> the computers on my LAN. When I try to print something from one of >> these computers, that is when it bombs and displays the foomatic- >> rip error message (foomatic-rip failed). >> >> The directions on that sheet appear to be if I wanted to print to >> this network printer that wasn't directly connected to the FreeBSD >> server. Am I mistaken about this? Also, there is no button on the >> printer that will print such a page, so I would have to figure out >> how to find this IP address by other means. I cannot see how to >> find it in the CUPS web interface. I assume CUPS issues it an IP >> address. >> >> The error_log that I have posted on previous threads is attached >> to this email (the successful print jobs were done locally while >> the error occurred when I printed to the printer from my MacBook >> Pro). Does anyone have any suggestions? I should note that prior >> to the CUPS upgrade to 1.2.0 (and the recent gnutls update), my >> setup was working (I was able to print from the server itself as >> well as all of the rest of the computers on my LAN). I have >> rebuilt all packages several times (except for the OS). >> >> >> On my MacBook Pro, when I go to the CUPS web interface, I see the >> following for the printer: >> [EMAIL PROTECTED] HP LaserJet 1160 Foomatic/hpijs >> (recommended) Description: hp LaserJet 1160Le >> Location: Den >> Printer State: idle, accepting jobs. >> >> 192.168.0.3 is the IP address of my FreeBSD server on my LAN. It >> looks as if Mac OS X 10.4.7 runs CUPS 1.1.23, but I could be >> mistaken. It has found the printer through Bonjour (zeroconf I >> believe is another name for it), so I didn't have to do any >> configuring. Could there be an incompatibility within these >> versions of CUPS? I have found the following page which lists >> several issues and talks about how CUPS 1.2.0 is broken in several >> places. Could one of these be the issue? >> >> http://www.bsdforums.org/forums/showthread.php?t=42391 >> >>> >>>> On a sidenote, I was having difficulties installing hpijs when >>>> hplip was >>>> already installed >>> >>> I'm working on that. >> Thank you for your assistance on this. >>> >>> Doug >>> >>> -- >>> This .signature sanitized for your protection >>> >> >> --------------------------------------------------------------------- >> --- >> >> _______________________________________________ >> freebsd-ports@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-ports >> To unsubscribe, send any mail to "freebsd-ports- >> [EMAIL PROTECTED]" > You need to restart CUPS when the printer "attaches" via USB or > else CUPS won't know about the USB port and you'll get this error > every time. I just did a /usr/local/etc/rc.d/cupsd restart and then printed something from my laptop. Same error. dell# lpstat -t scheduler is running no system default destination device for Create_PDF: cups-pdf:/ device for hp_LaserJet_1160Le: /dev/ulpt0 Create_PDF accepting requests since Sun Jun 25 11:27:52 2006 hp_LaserJet_1160Le accepting requests since Sun Jul 16 22:36:15 2006 printer Create_PDF is idle. enabled since Sun Jun 25 11:27:52 2006 printer hp_LaserJet_1160Le is idle. enabled since Sun Jul 16 22:36:15 2006 /usr/local/libexec/cups/filter/foomatic-rip failed hp_LaserJet_1160Le-30 iqgrande 7168 Sun Jul 16 22:36:02 2006 > > jmc --------------------------------- Você quer respostas para suas perguntas? Ou você sabe muito e quer compartilhar seu conhecimento? Experimente o Yahoo! Respostas! _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "[EMAIL PROTECTED]"
