Please provide netstat -nr. If you have more in pf.conf, please provide this too.
On Mon, Mar 12, 2018, 6:28 AM Rick van der Zwet <i...@rickvanderzwet.nl> wrote: > Hi, > > Could NAT translation be done with a single interface system without the > use of VLANs? > > I have ,a rather odd, (simplified) network configuration: > - single interface system (Router) which has two private IP addresses > 172.16.0.10/24 and 192.168.1.10/24. > - The gateway (to the internet) is found at 192.168.1.1 > - The Client with IP 172.16.0.20/24 > The Client (cannot be modified) is supposed to connect to the internet > via the Router. > > > My pf rules on Router are: > nat on sis0 inet proto tcp from 172.16.0.0/24 to !172.16.0.0/24 -> > 192.168.1.10 > > > Router is configured to allow routing: > net.inet.ip.forwarding=1 > > > pf.conf(5) tell me it will do translation on pass through packets: > Translation rules apply only to packets that pass through the > specified > interface, and if no interface is specified, translation is > applied > to > packets on all interfaces. > > > Looking at tcpdump of the router I do not see packages been translated > yet only being forwarded, which leaves me wondering could this be done > at all? > > Best regards, > -Rick > > > > > _______________________________________________ > freebsd-pf@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-pf > To unsubscribe, send any mail to "freebsd-pf-unsubscr...@freebsd.org" > _______________________________________________ freebsd-pf@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-pf To unsubscribe, send any mail to "freebsd-pf-unsubscr...@freebsd.org"
