On 6/27/11 11:34 PM, Espartano wrote: > Hi People I'm having a problem with my Alix board model 2d3 > (http://pcengines.ch/alix2d3.htm) , Yesterday I compiled and installed > NanoBSD into my alix board using FreeBSD 8.2 RELEASE, today when i > tried to configure network interfaces and pf firewall to do nat over > the wireless network I got this error and the sistem was rebooted: > > zrouter# /etc/rc.d/pf onestart > Enabling pf > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0x18 > fault code = supervisor read, page not present > instruction pointer = 0x20:0xc07c50ce > stack pointer = 0x28:0xcd1f8a18 > frame pointer = 0x28:0xcd1f8a38 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 1755 (pfctl) > trap number = 12 > panic: page fault > cpuid = 0 > KDB: stack backtrace: > #0 0xc072c5b7 at kdb_backtrace+0x47 > #1 0xc06fd457 at panic+0x117 > #2 0xc08f9003 at trap_fatal+0x323 > #3 0xc08f9280 at trap_pfault+0x270 > #4 0xc08f97c5 at trap+0x465 > #5 0xc08e037c at calltrap+0x6 > #6 0xc04d8a25 at pfioctl+0x965 > #7 0xc0681c8a at devfs_ioctl_f+0x10a > #8 0xc073b6b0 at kern_ioctl+0x280 > #9 0xc073b824 at ioctl+0x134 > #10 0xc07382e9 at syscallenter+0x329 > #11 0xc08f92d4 at syscall+0x34 > #12 0xc08e03e1 at Xint0x80_syscall+0x21 > Uptime: 4m6s > Cannot dump. Device not defined or unavailable. > Automatic reboot in 15 seconds - press a key on the console to abort >
You need to define a dump device then, so that you may extract the kernel's crash dump for analysis. [SNIP] > > Before I updated my Nanobsd image from FreeBSD 8.1 to 8.2 RELEASE my > alix board worked very well, the big diference between my old nanobsd > image and my new nanobsd image is that the new one have "option > VIMAGE" active. > Well, the next logical step would be to comment out the VIMAGE option and rebuild a kernel don't you think ? > > Could someone help me ? > > If there is some another thing that you need to figure out what was > happen please let me know. > Describe the procedure you followed to update your machine. It is possible that you did not update correctly, who knows... > > Thanks a lot. > > > PD: If this is the incorrect list for this item please let me know it. > _______________________________________________ You're at the right place :) _______________________________________________ freebsd-pf@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-pf To unsubscribe, send any mail to "freebsd-pf-unsubscr...@freebsd.org"
