Folks, I am trying to use stunnel & pf to devise a transparent proxy, but am unable to figure out how to do it. What I have is ext ip -> stunnel -> http service, but the http service does not know where to route back the packets, and remains in a sync state.
00:40:28.313038 IP 192.168.103.2.51791 > 127.0.0.1.80: Flags [S], seq 2806128000, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 2027735 ecr 0], length 0 00:40:31.306553 IP 192.168.103.2.51791 > 127.0.0.1.80: Flags [S], seq 2806128000, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 2028035 ecr 0], length 0 00:40:34.506518 IP 192.168.103.2.51791 > 127.0.0.1.80: Flags [S], seq 2806128000, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 2028355 ecr 0], length 0 00:40:37.706528 IP 192.168.103.2.51791 > 127.0.0.1.80: Flags [S], seq 2806128000, win 65535, options [mss 16344,sackOK,eol], length 0 rpminit# netstat -ln Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp4 0 0 192.168.103.2.51218 127.0.0.1.80 SYN_SENT tcp4 0 0 192.168.103.62.443 192.168.103.2.51218 ESTABLISHED If I disable the transparent config setting the communication is works, but http access logs show the request coming from local host. 00:26:53.435415 IP 127.0.0.1.30655 > 127.0.0.1.80: Flags [P.], ack 1, win 8960, options [nop,nop,TS val 1946248 ecr 3625203070], length 6 00:26:53.435864 IP 127.0.0.1.80 > 127.0.0.1.30655: Flags [P.], ack 7, win 8960, options [nop,nop,TS val 3625203735 ecr 1946248], length 44 00:26:53.436426 IP 127.0.0.1.80 > 127.0.0.1.30655: Flags [F.], seq 45, ack 7, win 8960, options [nop,nop,TS val 3625203735 ecr 1946248], length 0 00:26:53.436463 IP 127.0.0.1.30655 > 127.0.0.1.80: Flags [.], ack 46, win 8960, options [nop,nop,TS val 1946248 ecr 3625203735], length 0 00:26:53.526062 IP 127.0.0.1.30655 > 127.0.0.1.80: Flags [F.], seq 7, ack 46, win 8960, options [nop,nop,TS val 1946257 ecr 3625203735], length 0 00:26:53.526112 IP 127.0.0.1.80 > 127.0.0.1.30655: Flags [.], ack 8, win 8959, options [nop,nop,TS val 3625203744 ecr 1946257], length 0 00:28:03.523841 IP 127.0.0.1.47994 > 127.0.0.1.80: Flags [S], seq 1128551040, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 1953257 ecr 0], length 0 00:28:03.523924 IP 127.0.0.1.80 > 127.0.0.1.47994: Flags [S.], seq 4120370047, ack 1128551041, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 727165180 ecr 1953257], length 0 00:28:03.523942 IP 127.0.0.1.47994 > 127.0.0.1.80: Flags [.], ack 1, win 8960, options [nop,nop,TS val 1953257 ecr 727165180], length 0 00:28:05.254567 IP 127.0.0.1.47994 > 127.0.0.1.80: Flags [P.], ack 1, win 8960, options [nop,nop,TS val 1953430 ecr 727165180], length 6 00:28:05.254888 IP 127.0.0.1.80 > 127.0.0.1.47994: Flags [P.], ack 7, win 8960, options [nop,nop,TS val 727165353 ecr 1953430], length 44 00:28:05.255194 IP 127.0.0.1.80 > 127.0.0.1.47994: Flags [F.], seq 45, ack 7, win 8960, options [nop,nop,TS val 727165353 ecr 1953430], length 0 00:28:05.255234 IP 127.0.0.1.47994 > 127.0.0.1.80: Flags [.], ack 46, win 8960, options [nop,nop,TS val 1953430 ecr 727165353], length 0 00:28:05.408742 IP 127.0.0.1.47994 > 127.0.0.1.80: Flags [F.], seq 7, ack 46, win 8960, options [nop,nop,TS val 1953445 ecr 727165353], length 0 00:28:05.408799 IP 127.0.0.1.80 > 127.0.0.1.47994: Flags [.], ack 8, win 8959, options [nop,nop,TS val 727165368 ecr 1953445], length 0 00:28:59.372253 IP 192.168.103.2.60900 > 127.0.0.1.80: Flags [S], seq 2362825029, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 1958842 ecr 0], length 0 00:29:02.371384 IP 192.168.103.2.60900 > 127.0.0.1.80: Flags [S], seq 2362825029, win 65535, options [mss 16344,nop,wscale 3,sackOK,TS val 1959142 ecr 0], length 0 ==> /var/log/httpd-access.log <== 127.0.0.1 - - [01/Jan/2011:23:18:44 -0800] "GET /" 200 44 "-" "-" 127.0.0.1 - - [01/Jan/2011:23:18:53 -0800] "GET /" 200 44 "-" "-" 127.0.0.1 - - [01/Jan/2011:23:21:48 -0800] "GET /" 200 44 "-" "-" I've tried to set up a rdr rule to redirect requests from internal ip to external port 80 to internal port 80, but no luck. /etc/pf.conf int_if="lo0" ext_if="ed0" rdr on $int_if inet proto tcp from $int_if to any port 80 -> 127.0.0.1 port 80 Under Linux, it is possible to set up rules to perform internal proxy diverting thereby, "Re-write address to appear as if wrapped daemon is connecting from the SSL client machine instead of the machine running stunnel." See also http://www.stunnel.org/faq/stunnel.html and http://www.stunnel.org/faq/transparent.html. iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 1 iptables -t mangle -A DIVERT -j ACCEPT ip rule add fwmark 1 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 Is there a way to devise pf rdr rules to do the same? Thanks _______________________________________________ freebsd-pf@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-pf To unsubscribe, send any mail to "freebsd-pf-unsubscr...@freebsd.org"
