On 1/11/08, Alexandre Biancalana <[EMAIL PROTECTED]> wrote: > > FW1:/usr/home/ale $ ifconfig pfsync0 > pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1460 > pfsync: syncdev: interconnect syncpeer: 224.0.0.240 maxupd: 128 > > FW1:/usr/home/ale $ ifconfig interconnect > interconnect: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> > metric 0 mtu 1500 > options=8<VLAN_MTU> > ether 00:16:76:24:23:25 > inet 10.0.0.1 netmask 0xfffffffc broadcast 10.0.0.3 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > > > > FW2:/root # ifconfig pfsync0 > pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1460 > pfsync: syncdev: interconnect syncpeer: 224.0.0.240 maxupd: 128 > FW2:/root # ifconfig interconnect > interconnect: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> > metric 0 mtu 1500 > > options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> > ether 00:13:20:c4:7f:ca > inet 10.0.0.2 netmask 0xfffffffc broadcast 10.0.0.3 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active >
Thank you. Do you see the states on the backup machine when it is in the backup status mode? pfctl -ss You should see a similar output on the backup machine as the primary. BTW: I did not know about ifconfig interconnect... Cool stuff!! Scott _______________________________________________ freebsd-pf@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-pf To unsubscribe, send any mail to "[EMAIL PROTECTED]"
