On Wed, 2006-02-22 at 16:07 +0100, Dimitry Andric wrote:
> Read pf.conf(5), especially the parts about binat. This is probably
> what you want.
Ok, thank you... I'm reading about but think that I some of some
example... reading the FAQ of OpenVPN I saw this one:
=======================================================================================
Does anybody know how to remap local addresses, if I want to connect two
networks with an overlap in the private address range?
Using iptables 1.2.7a+ and the NETMAP target:
iptables -t nat -A PREROUTING -d 192.168.0.0/24 -j NETMAP --to
192.168.1.0/24
or
iptables -t nat -A POSTROUTING -d 192.168.1.0/24 -j NETMAP --to
192.168.0.0/24
=======================================================================================
Maybe is some like this?
binat on $vpn_if from any to 192.168.0.1 -> 192.168.1.0
But... I have this error: pfctl: Syntax error in config file: pf rules
not loaded
Well... I'm a little bit of lost... is someone have some tip...
Thanks!
--
Tiago Cruz
http://linuxrapido.org
_______________________________________________
freebsd-pf@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-pf
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
