Jon Simola wrote:

On 2/22/06, Christopher McGee <[EMAIL PROTECTED]> wrote:

I might be going about this the wrong way, but, this is ultimately what
I'm trying to do.  One queue has guaranteed 3Mb, another has a
guaranteed 4Mb, another has 3Mb guarantee, which leaves about 90Mb as a
pool for all of them.  If they are backlogged, I want the first 2 queues
to be able to utilize the entire 90Mb, and the 3rd queue should be able
to utilize about 25Mb of it.  This is a simplified example of what I
sent earlier.  But if I can do this, I can accomplish what I'm trying to
and build off it later.

If you're guaranteeing bandwidth allocation, then you want realtime,
and probably avoid the bandwidth declarations which are not quite the
same. HFSC is not trivial to get your head wrapped around and is
poorly documented because of that. It took me reading the man pages
and the PF guide several times over a couple months to get it
together.

Another example for you to peruse:

queue q_dmz hfsc(ecn realtime 50Mb upperlimit 90Mb) \
{ q_dmz_h, q_dmz_hb, q_dmz_l, q_dmz_lb }
queue   q_dmz_h hfsc(realtime 10% upperlimit 90%) priority 7
queue   q_dmz_hb hfsc(realtime 20% upperlimit 90%) priority 4
queue   q_dmz_l hfsc(realtime 5% upperlimit 90%) priority 3
queue   q_dmz_lb hfsc(realtime 10% upperlimit 90%) priority 0

Leave out the linkshare and bandwidth, just use realtime and
upperlimit. And the priority of the queues matters, in the above each
of the queues can go as high as 81Mb (90% of 90Mb) but if more than
one tries to go above 45Mb, the one with the higher priority gets
first chance at available bandwidth. Linkshare is another override; in
the above it is easily possible that the q_dmz_lb queue will get quite
backlogged as it gets last chance, adding linkshare would allow it to
bypass the priorities of the other queues. You may not want to even
use priorities, using just realtime and upperlimit is probably a lot
easier for your simplified example.

Using the service curves is even more complex. This is all based on my
experience and research, so it may not be correct, but it's the
explanation that I use.

--
Jon Simola
Systems Administrator
ABC Communications
This information is very helpful. Here is my modified configuration, unfortunately it still gets the same errors:

altq on $ext_if bandwidth 100Mb hfsc queue { high_pri, med_pri, junk }
queue high_pri hfsc(realtime 128Kb upperlimit 500Kb red) priority 7
queue med_pri hfsc(realtime 5Mb upperlimit 99% default ecn red) priority 5
queue junk hfsc(upperlimit 95% red)

Just to clarify what I'm trying to do... I'm trying to guarantee 128K for high_pri stuff(ssh, carp, etc..) and allow up to 500Kfor it. Other services, like web traffic etc.. falls in med_pri, which gets 5Mb all the time but can use up to 99Mb. All other traffic, like cvsup, ftp, etc... will get no guarantees, but can use up to 95Mb if it's available. From all my reading, this seems correct but I still get the parent sc errors.

Chris
_______________________________________________
freebsd-pf@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-pf
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to