OK . I guesss it's about porting some parts from the linux driver, but the code
is slightly different today..
Is there any card that support correctly SR-IOV ? chelsio (but i don't know
where to source them) ? Intel ?
Benoît
On Monday, February 12th, 2024 at 10:54, Konstantin Belousov
<kostik...@gmail.com> wrote:
> On Mon, Feb 12, 2024 at 08:30:37AM +0000, Benoit Chesneau wrote:
>
> > Hi Konstantin,
> >
> > indeed the port is plugged to a switch. The port is enabled. So yes that
> > probably is. Is this a firmware issue or can it be solved in the driver?
>
> It is driver issue, and requires some (significant) driver updates.
>
> > Benoît
> >
> > On Sunday, February 11th, 2024 at 04:50, Konstantin Belousov
> > kostik...@gmail.com wrote:
> >
> > > On Sat, Feb 10, 2024 at 09:23:36AM +0000, Benoit Chesneau wrote:
> > >
> > > > I have tested the following scenario:
> > > >
> > > > Setup the mellanox driver with SRIOV:
> > > >
> > > > ```
> > > > $ sudo more /etc/iov/mce0.conf
> > > > PF {
> > > > device: "mlx5_core0";
> > > > num_vfs: 8;
> > > > }
> > > >
> > > > DEFAULT {
> > > > passthrough: true;
> > > > }
> > > >
> > > > VF-0 {
> > > > mac-addr: "02:01:02:02:01:00";
> > > > }
> > > >
> > > > VF-1 {
> > > > mac-addr: "02:01:02:02:01:01";
> > > > }
> > > >
> > > > VF-2 {
> > > > passthrough: false;}
> > > >
> > > > ```
> > > >
> > > > With one VF in the vm answering to a specific vlan, and one jail on the
> > > > host using vnet with the PF in a bridge and a epair interface added to
> > > > this bridge.
> > > >
> > > > When I am pinging from the jail to the VF in the vm , the vm receive
> > > > the ping or arp requests. But the jail doesn't receive the response. In
> > > > a same manner , when I ping from the VM to the jail, the host is not
> > > > found. bridge arp doesn't return the vm mac address.
> > > >
> > > > All the hosts has the PF interface set in promiscuous mode but this
> > > > doesn't seem to be enough to allows the bridge to learn other mac ids.
> > > > When I directly add the IP to PF, Ping works from the vm to the PF, the
> > > > reverse is also true.
> > > >
> > > > Do I miss a setting? Is this expected with mellanox cards? What shoudl
> > > > I look for?
> > >
> > > Do you have the port plugged into a switch and the port enabled?
> > > I suspect VFs do not have enough hairpin code to do proper loopback
> > > communications, and I certain that multicast loopback does not work.
