Hi, On Sat, 12 Mar 2022 20:47:10 +0900, Larry Rosenman wrote:
> > Something like this should work for you: > > > > ifconfig_eth0_ipv6="inet6 fe80::53:1 -auto_linklocal accept_rtadv" > > Nope, didn't work on my home net: It's strange to me. That setting is actually working on my box. > ❯ ifconfig bce0 > bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu > 1500 > > options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE> > ether a4:ba:db:29:66:95 > inet 192.168.200.4 netmask 0xfffffc00 broadcast 192.168.203.255 > inet 192.168.200.5 netmask 0xfffffc00 broadcast 192.168.203.255 > inet6 fe80::a6ba:dbff:fe29:6695%bce0 prefixlen 64 scopeid 0x2 It seems -auto_linklocal is not working for you. > inet6 fe80::53:1%bce0 prefixlen 64 scopeid 0x2 > inet6 2600:1700:210:b18f:a6ba:dbff:fe29:6695 prefixlen 64 autoconf > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > nd6 options=3<PERFORMNUD,ACCEPT_RTADV> > > grep bce0 /etc/rc.conf: > ifconfig_bce0="inet 192.168.200.4/22 " > ifconfig_bce0_alias0="inet 192.168.200.5/22 " > ifconfig_bce0_ipv6="inet6 fe80::53:1 accept_rtadv -auto_linklocal" I'm using DHCP for IPv4 address. When ifconfig_bce0_alias0 is set, it does not work. It seems that ifconfig_bce0_alias0 does up bce0 before set -auto_linklocal. After some testing, following setting works here. ifconfig_bce0="inet6 fe80::53:1 -auto_linklocal" ifconfig_bce0_alias0="inet 192.168.200.4/22" ifconfig_bce0_alias1="inet 192.168.200.5/22" ifconfig_bce0_ipv6="inet6 accept_rtadv" Sincerely, -- Hajimu UMEMOTO u...@mahoroba.org u...@freebsd.org http://www.mahoroba.org/~ume/
