Hi Michael,
I've attached tcpdumps for port 80 on both sides of a bad transfer, using 2 VMs
in the same datacenter, FreeBSD 13 serving and 12 as a client. A friend of mine
suggested I also run some tests with iperf3, so pasting those results below.
You'll see it going fast in one direction and crawling in the other on TCP.
There's also some disparity on UDP.
TCP:
[ ID][Role] Interval Transfer Bitrate Retr Cwnd
[ 5][TX-C] 0.00-1.00 sec 27.7 MBytes 233 Mbits/sec 342 26.7 KBytes
[ 7][RX-C] 0.00-1.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 1.00-2.00 sec 15.8 MBytes 132 Mbits/sec 249 52.0 KBytes
[ 7][RX-C] 1.00-2.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 2.00-3.00 sec 13.7 MBytes 115 Mbits/sec 307 15.4 KBytes
[ 7][RX-C] 2.00-3.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 3.00-4.00 sec 14.5 MBytes 121 Mbits/sec 260 22.4 KBytes
[ 7][RX-C] 3.00-4.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 4.00-5.00 sec 14.3 MBytes 120 Mbits/sec 240 37.9 KBytes
[ 7][RX-C] 4.00-5.00 sec 5.58 KBytes 45.7 Kbits/sec
[ 5][TX-C] 5.00-6.00 sec 17.7 MBytes 149 Mbits/sec 363 15.4 KBytes
[ 7][RX-C] 5.00-6.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 6.00-7.00 sec 14.8 MBytes 124 Mbits/sec 287 8.38 KBytes
[ 7][RX-C] 6.00-7.00 sec 5.58 KBytes 45.7 Kbits/sec
[ 5][TX-C] 7.00-8.00 sec 14.7 MBytes 123 Mbits/sec 293 28.1 KBytes
[ 7][RX-C] 7.00-8.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 8.00-9.00 sec 11.9 MBytes 100 Mbits/sec 325 18.3 KBytes
[ 7][RX-C] 8.00-9.00 sec 4.18 KBytes 34.3 Kbits/sec
[ 5][TX-C] 9.00-10.00 sec 14.3 MBytes 120 Mbits/sec 315 39.3 KBytes
[ 7][RX-C] 9.00-10.00 sec 4.18 KBytes 34.3 Kbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-10.00 sec 159 MBytes 134 Mbits/sec 2981
sender
[ 5][TX-C] 0.00-10.00 sec 159 MBytes 134 Mbits/sec
receiver
[ 7][RX-C] 0.00-10.00 sec 77.0 KBytes 63.1 Kbits/sec 65
sender
[ 7][RX-C] 0.00-10.00 sec 44.6 KBytes 36.6 Kbits/sec
receiver
-----------------------------------------------------------------------------------------------------------
UDP:
[ ID][Role] Interval Transfer Bitrate Jitter
Lost/Total Datagrams
[ 5][TX-C] 0.00-1.00 sec 81.6 MBytes 685 Mbits/sec 67798
[ 7][RX-C] 0.00-1.00 sec 8.80 MBytes 73.8 Mbits/sec 0.255 ms
54070/60475 (89%)
[ 5][TX-C] 1.00-2.00 sec 72.7 MBytes 610 Mbits/sec 64802
[ 7][RX-C] 1.00-2.00 sec 8.52 MBytes 71.5 Mbits/sec 0.154 ms
68912/75116 (92%)
[ 5][TX-C] 2.00-3.00 sec 73.7 MBytes 618 Mbits/sec 64158
[ 7][RX-C] 2.00-3.00 sec 8.52 MBytes 71.5 Mbits/sec 0.276 ms
67738/73945 (92%)
[ 5][TX-C] 3.00-4.00 sec 76.6 MBytes 643 Mbits/sec 63521
[ 7][RX-C] 3.00-4.00 sec 8.55 MBytes 71.8 Mbits/sec 0.160 ms
68647/74874 (92%)
[ 5][TX-C] 4.00-5.00 sec 76.1 MBytes 638 Mbits/sec 64614
[ 7][RX-C] 4.00-5.00 sec 8.55 MBytes 71.7 Mbits/sec 0.461 ms
67542/73767 (92%)
[ 5][TX-C] 5.00-6.00 sec 75.9 MBytes 637 Mbits/sec 64834
[ 7][RX-C] 5.00-6.00 sec 8.57 MBytes 71.9 Mbits/sec 0.297 ms
71565/77806 (92%)
[ 5][TX-C] 6.00-7.00 sec 73.0 MBytes 613 Mbits/sec 63639
[ 7][RX-C] 6.00-7.00 sec 8.40 MBytes 70.5 Mbits/sec 0.199 ms
69545/75663 (92%)
[ 5][TX-C] 7.00-8.00 sec 74.6 MBytes 626 Mbits/sec 65030
[ 7][RX-C] 7.00-8.00 sec 8.78 MBytes 73.6 Mbits/sec 0.254 ms
67173/73566 (91%)
[ 5][TX-C] 8.00-9.00 sec 75.0 MBytes 629 Mbits/sec 64848
[ 7][RX-C] 8.00-9.00 sec 8.77 MBytes 73.5 Mbits/sec 0.298 ms
70932/77315 (92%)
[ 5][TX-C] 9.00-10.00 sec 74.5 MBytes 625 Mbits/sec 64487
[ 7][RX-C] 9.00-10.00 sec 8.71 MBytes 73.1 Mbits/sec 0.185 ms
68268/74612 (91%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Jitter
Lost/Total Datagrams
[ 5][TX-C] 0.00-10.00 sec 754 MBytes 632 Mbits/sec 0.000 ms 0/647731
(0%) sender
[ 5][TX-C] 0.00-10.12 sec 105 MBytes 87.2 Mbits/sec 0.245 ms
571090/647649 (88%) receiver
[ 7][RX-C] 0.00-10.00 sec 1009 MBytes 846 Mbits/sec 0.000 ms 0/761013
(0%) sender
[ 7][RX-C] 0.00-10.12 sec 86.2 MBytes 71.4 Mbits/sec 0.185 ms
674392/737139 (91%) receiver
On Tuesday, March 16, 2021 4:16:15 AM EDT tue...@freebsd.org wrote:
> > On 15. Mar 2021, at 12:56, Blake Hartshorn <cont...@blakehartshorn.com>
> > wrote:
> >
> > The short version, when I use FreeBSD 13, delivering data can take 5
> > minutes for 1MB over SSH or HTTP when using IPv6. This problem does not
> > happen with IPv4. I installed FreeBSD 12 and Linux on that same device,
> > neither had the problem.
> >
> > Did some troubleshooting with Linode, have ultimately ruled the network
> > itself out at this point. When the server is on FreeBSD 13, it can download
> > quickly over IPv6, but not deliver. Started investigating after noticing my
> > SSH session was lagging when cat'ing large files or running builds. This
> > problem even occurs between VMs in the same datacenter. I generated a 1MB
> > file of base64 garbage served by nginx for testing. IPv6 is being
> > configured by SLAAC and on both 12 and 13 installs was setup by the
> > installer. Linode uses Linux/KVM hosts for their virtual machines so it's
> > running on that virtual adapter.
> >
> > I asked on the forums, another user recommended going to the mailing lists
> > instead. Does anyone know if config settings need to be different on 13?
> > Did I maybe just find a real issue? I can provide any requested details.
> > Thanks!
> Could you prove a .pcap tracefile, one from the sender, one from the
> recevier, of
> a TCP/IPv6 connection, which doesn't work as expected. For example, use your
> 1MB
> base64 garbage transfer.
>
> Best regardes
> Michael
> >
> >
> > _______________________________________________
> > freebsd-net@freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-net
> > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
>
>
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
