Hello. I discovered that public key derivation in if_wg is not working properly. You will need to apply the following patch: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252894 and reinstall the kernel (I tested it with Mullvad VPN). Then you must create WireGuard interface like so: ifconfig wg0 create private-key <Your private key here> listen-port 12345 # 12345 is just a random unused port Then add a peer (endpoint): ifconfig wg0 peer public-key <Peer's public key> allowed-ips 0.0.0.0/0 allowed-ips <more allowed IPs> endpoint <Endpoint's IP:port> Then assign IP addres to wg0: ifconfig wg0 inet <Your IP address in private network>
After these steps wg0 should go up. Then configure your firewall and add new routes as you wish. Here is my configuration for Mullvad: https://lists.freebsd.org/pipermail/freebsd-net/2021-January/057385.html Do not forget to patch the kernel, otherwise it will not work. вт, 26 янв. 2021 г. в 09:12, Özkan KIRIK <ozkan.ki...@gmail.com>: > > Hello, > > I'm running FreeBSD 13-ALPHA2 amd64. > But no such manual page was found: if_wg or wg. > Is it possible to share how to use and how to debug connection status of > if_wg kernel module? > > Thanks > _______________________________________________ > freebsd-net@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
