Hi everyone,
I had this working for months until a reboot either got things started up in a
different order or cleared what I setup by hand (it’s a snowflake
test/development system at home) and did whatever I’d actually configured.
I have a single trunk’ed (em) interface to the switch. The main network is
untagged, and I have various tagged networks as well. I was using the tagged
networks in bhyve virtual machines.
(Some?) traffic doesn’t pass from the bridged tap interfaces (or from the
bridge itself) to the vlan interface (em0.8 for example). tcpdump shows lots
of packets coming from the “outside” and in, but for example if I do a ping
from one of the tap interfaces then nothing shows up on the bridge interface
(looking with tcpdump).
Another symptom is that if I move the “host IP” from the em0.8 interface to the
bridge interface that’s including em0.8 then I can no longer communicate with
that IP from the rest of the network.
In the output below I can ping 192.168.53.42 from another system on VLAN 53
(outside this box) and I can ping 192.168.53.42 from another system on the
bridge, but I can’t ping between the system outside this box and the VM on the
bridge.
I’ve disabled pf everywhere.
As I mentioned, some traffic crosses but it seems like arp requests gets
blocked somewhere?
I don’t think it’s the switch, because as long as I don’t use the bridge
everything works fine. :-/
Any suggestions? (or other debug output that’d be useful).
Ask
root@helgi:~ # ifconfig em0
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=812099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER>
ether c0:3f:d5:6d:77:87
inet 192.168.4.42 netmask 0xfffffc00 broadcast 192.168.7.255
inet6 fe80::c23f:d5ff:fe6d:7787%em0 prefixlen 64 scopeid 0x1
inet6 2601:647:4400:2f50:c23f:d5ff:fe6d:7787 prefixlen 64 autoconf
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
root@helgi:~ # ifconfig em0.53
em0.53: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=1<RXCSUM>
ether c0:3f:d5:6d:77:87
inet 192.168.53.42 netmask 0xffffff00 broadcast 192.168.53.255
inet6 fe80::c23f:d5ff:fe6d:7787%em0.53 prefixlen 64 scopeid 0x4
groups: vlan
vlan: 53 vlanpcp: 0 parent interface: em0
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
root@helgi:~ # ifconfig vm-dns
vm-dns: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 66:28:db:a7:63:1b
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 10 priority 128 path cost 2000000
member: em0.53 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 55
groups: bridge vm-switch viid-b3bf6@
nd6 options=1<PERFORMNUD>
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
