One other note.. I notice his kernel conf he sent does not have the right things to get BBR even to attempt to build.
I would suggest using that config for the first steps.. then he must add the additional tcp stacks and the hpts in order to get bbr/rack and any other extra stack…. But I would suggest to build with his current config first and once he has that in place and building a) apply the patch b) add the extra kernel options R > On Sep 18, 2019, at 6:50 AM, Randall Stewart <r...@netflix.com> wrote: > > Thats great idea Michael. > > From the look fo the build log I was sent, his blow-up has nothing to do > with the patches. > > He should probably > > 1) Check out a fresh version of head. > 2) Follow the instructions in UPDATING to get a clean build. > — make buildworld > — make buildkernel KERNCONF=his-conf > — make installkernel KERNCONF=his-conf > > ** do the reboot and merge master ** > > Then after that he could > > 3) Apply the current patch in the review > 4) do build that > — make buildkernel KERNCONF=his_conf -DNO_CLEAN -DNO_CLEANDIR > — make install kernel KERNCONF=his_conf > > And he should have it all working :) > > I have done multiple builds with the latest head from yesterday both with and > without > the extra stacks and hpts.. and I can’t get a build failure.. this would > verify he can > at least build head.. > > R > >> On Sep 18, 2019, at 12:10 AM, Michael Tuexen >> <michael.tue...@lurchi.franken.de> wrote: >> >>> On 18. Sep 2019, at 08:19, vm finance <vm.finan...@gmail.com> wrote: >>> >>> correcting a typo: >>> >>> svn co svn://svn.freebsd.org/base/head /usr/src >>> current revision: 352434 >> I suggest to build/install head first without any patches. After that has >> worked, >> apply the patches you are interested in. That way it is easy to separate >> generic >> build issues and issue specific to a patch. >> >> Best regards >> Michael >>> >>> Thank you! >>> >>> On Tue, Sep 17, 2019 at 10:11 PM vm finance <vm.finan...@gmail.com> wrote: >>> >>>> Actually I am on head already as mentioned previously. Pulled it using >>>> yesterday: >>>> >>>> svn co svn://svn.freebsd.org/base/head /use/src >>>> >>>> >>>> If you could pls let me know the new patch, I can try that. >>>> >>>> Thanks >>>> >>>> Sent from my iPhone >>>> >>>> On 18-Sep-2019, at 8:56 AM, Randall Stewart <r...@netflix.com> wrote: >>>> >>>> There have been several patches pre-this one that provide >>>> the infrastructure to support BBR. >>>> >>>> Release 12.0 will *not* have these patches and will *not* compile it. >>>> >>>> I have no intention at this point in doing a MFC of this work.. so if you >>>> want >>>> to run BBR you need to run Head >>>> >>>> R >>>> >>>> On Sep 17, 2019, at 7:26 PM, vm finance <vm.finan...@gmail.com> wrote: >>>> >>>> >>>> Hi Randall, >>>> >>>> >>>> Could you please provide a pointer to the latest patch. I had applied the >>>> one you published Sep-10. >>>> >>>> >>>> Following is what I have done: >>>> >>>> 1. Picked FreeBSD 12.0 RELEASE VM from osboxes.org >>>> >>>> 2. Got VM up under VMPlayer on x86 laptop >>>> >>>> 3. Checked out latest codebase from freebsd repo: >>>> >>>> svn co svn://svn.freebsd.org/base/head /usr/src* >>>> >>>> cd /usr/src; >>>> >>>> make buildworld buildkernel >>>> >>>> [this is where make fails when patch is applied] >>>> >>>> >>>> I could try to build with your latest patch - please send me a pointer. >>>> >>>> >>>> Thanks for your help! >>>> >>>> >>>> >>>> On Tue, Sep 17, 2019 at 1:33 PM Randall Stewart <r...@netflix.com> wrote: >>>> >>>> Looking at your make file log I can’t really tell what you are doing. >>>> >>>> >>>> Its not the BBR or Rack code that is blowing up… >>>> >>>> >>>> Are you cross compiling? >>>> >>>> >>>> I have done the old fashioned kernel make >>>> >>>> >>>> i.e. >>>> >>>> >>>> cd src/sys/amd64/config >>>> >>>> config headvm >>>> >>>> cd ../compile/headvm >>>> >>>> >>>> make cleandepend ; make depend; make -j3 >>>> >>>> >>>> I have done >>>> >>>> >>>> cd src >>>> >>>> make buildkernel KERNCONF=headvm >>>> >>>> >>>> And even >>>> >>>> >>>> make buildkernel KERNCONF=GENERIC >>>> >>>> >>>> to make sure that the build works without bbr. >>>> >>>> >>>> I attach my headvm config.. >>>> >>>> >>>> What exactly are you building and how? kernel config too please? >>>> >>>> >>>> R >>>> >>>> >>>> >>>> >>>> >>>> On Sep 17, 2019, at 1:11 PM, Randall Stewart <r...@netflix.com> wrote: >>>> >>>> >>>> looking >>>> >>>> >>>> I was at 352408.. let me update and try it >>>> >>>> >>>> R >>>> >>>> >>>> On Sep 17, 2019, at 1:10 PM, Randall Stewart <r...@netflix.com> wrote: >>>> >>>> >>>> Hmm >>>> >>>> >>>> Did you get the patch I updated too this am? >>>> >>>> >>>> I have built it both with and without the bbr stack and had no issue.. >>>> there was >>>> >>>> an issue with KTLS before the update though. >>>> >>>> >>>> I don’t recognize what you have below there though… >>>> >>>> >>>> R >>>> >>>> >>>> On Sep 17, 2019, at 11:47 AM, vm finance <vm.finan...@gmail.com> wrote: >>>> >>>> >>>> Got it - thank you! >>>> >>>> >>>> btw, I tried to build the patch but its giving an error. Following is SVN >>>> info + make error mesg. >>>> >>>> >>>> Please let me know what am I missing here? >>>> >>>> >>>> Thanks! >>>> >>>> >>>> #svnlite revision >>>> >>>> Path: . >>>> >>>> Working Copy Root Path: /usr/src >>>> >>>> URL: svn://svn.freebsd.org/base/head >>>> >>>> Relative URL: ^/head >>>> >>>> Repository Root: svn://svn.freebsd.org/base >>>> >>>> Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f >>>> >>>> Revision: 352436 >>>> >>>> Node Kind: directory >>>> >>>> Schedule: normal >>>> >>>> Last Changed Author: jah >>>> >>>> Last Changed Rev: 352434 >>>> >>>> Last Changed Date: 2019-09-17 03:39:31 +0000 (Tue, 17 Sep 2019) >>>> >>>> >>>> root@osboxes:/usr/src # >>>> >>>> >>>> -------------------------------------------- snip >>>> ---------------------------- >>>> >>>> >>>> ad_elf64_obj.llo reloc_elf64.llo disk.llo part.llo vdisk.llo dev_net.llo >>>> bcache.llo interp_simple.llo zfs_cmd.llo >>>> >>>> rm -f .depend .depend.* GPATH GRTAGS GSYMS GTAGS >>>> >>>> ===> sys (cleandir) >>>> >>>> rm -f export_syms machine x86 tcp_bbr.ko tcp_bbr.kld bbr.o sack_filter.o >>>> rack_bbr_common.o opt_inet.h opt_inet6.h opt_ipsec.h opt_tcpdebug.h >>>> opt_kern_tls.h >>>> >>>> rm: x86: is a directory >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make[3]: stopped in /usr/src/sys >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make[2]: stopped in /usr/src >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make[1]: stopped in /usr/src >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make: stopped in /usr/src >>>> >>>> >>>> >>>> On Tue, Sep 17, 2019 at 6:41 PM vm finance <vm.finan...@gmail.com> wrote: >>>> >>>> Got it - thank you! >>>> >>>> >>>> btw, I tried to build the patch but its giving an error. Following is SVN >>>> info + make error mesg. >>>> >>>> I have also attached the entire build log...snippet is below >>>> >>>> >>>> Please let me know what am I missing here? >>>> >>>> >>>> Thanks! >>>> >>>> >>>> #svnlite revision >>>> >>>> Path: . >>>> >>>> Working Copy Root Path: /usr/src >>>> >>>> URL: svn://svn.freebsd.org/base/head >>>> >>>> Relative URL: ^/head >>>> >>>> Repository Root: svn://svn.freebsd.org/base >>>> >>>> Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f >>>> >>>> Revision: 352436 >>>> >>>> Node Kind: directory >>>> >>>> Schedule: normal >>>> >>>> Last Changed Author: jah >>>> >>>> Last Changed Rev: 352434 >>>> >>>> Last Changed Date: 2019-09-17 03:39:31 +0000 (Tue, 17 Sep 2019) >>>> >>>> >>>> root@osboxes:/usr/src # >>>> >>>> >>>> -------------------------------------------- snip >>>> ---------------------------- >>>> >>>> >>>> ad_elf64_obj.llo reloc_elf64.llo disk.llo part.llo vdisk.llo dev_net.llo >>>> bcache.llo interp_simple.llo zfs_cmd.llo >>>> >>>> rm -f .depend .depend.* GPATH GRTAGS GSYMS GTAGS >>>> >>>> ===> sys (cleandir) >>>> >>>> rm -f export_syms machine x86 tcp_bbr.ko tcp_bbr.kld bbr.o sack_filter.o >>>> rack_bbr_common.o opt_inet.h opt_inet6.h opt_ipsec.h opt_tcpdebug.h >>>> opt_kern_tls.h >>>> >>>> rm: x86: is a directory >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make[3]: stopped in /usr/src/sys >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make[2]: stopped in /usr/src >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make[1]: stopped in /usr/src >>>> >>>> *** Error code 1 >>>> >>>> >>>> Stop. >>>> >>>> make: stopped in /usr/src >>>> >>>> >>>> >>>> On Tue, Sep 17, 2019 at 6:27 PM Randall Stewart <r...@netflix.com> wrote: >>>> >>>> Pacing is provided by tcp_hpts.c. The current linux patches do not have >>>> >>>> to have fq.. they built an alternate means of doing pacing into bbr. >>>> >>>> >>>> In either case our testing has shown that our pacing is more accurate than >>>> >>>> either fq or the internal pacer :) >>>> >>>> >>>> R >>>> >>>> >>>> On Sep 17, 2019, at 11:05 AM, vm finance <vm.finan...@gmail.com> wrote: >>>> >>>> >>>> Thanks Randall. >>>> >>>> I was able to apply the patch - now rebuilding the kernel. Would update on >>>> how it goes. >>>> >>>> >>>> BTW, is there any description on how lack of tc_fq under FreeBSD is >>>> compensated here? >>>> >>>> The original BBR patches on Linux show that as a must-have? Is that >>>> functionality implemented via tcp_ratelimit.[ch]? >>>> >>>> >>>> Any pointers to existing presentations/discussions highly appreciated? >>>> >>>> >>>> Thanks a lot. >>>> >>>> >>>> On Tue, Sep 17, 2019 at 5:39 AM Randall Stewart <r...@netflix.com> wrote: >>>> >>>> You should be able to compile it against the current head. I re-doing that >>>> now (had an >>>> >>>> issue with my machine and had to roll it back to a backup). >>>> >>>> >>>> When I put the patch up on Sept 10th it complied with and without BBR on >>>> whatever >>>> >>>> was that rev.. >>>> >>>> >>>> Looking in the commit logs that would have been around 352191 >>>> >>>> >>>> Hope that helps >>>> >>>> >>>> R >>>> >>>> >>>> On Sep 17, 2019, at 3:32 AM, vm finance <vm.finan...@gmail.com> wrote: >>>> >>>> >>>> Hi Randall, >>>> >>>> >>>> Thanks for releasing BBR patch: >>>> >>>> https://reviews.freebsd.org/D21582#change-xcAWBif3E9Jq >>>> >>>> >>>> Could you please let me know what SVN/GIT label tag this is based on? I >>>> would like to patch and experiment with it. I couldn't find this info in >>>> the released patch. >>>> >>>> >>>> Thanks a lot! >>>> >>>> >>>> On Tue, Sep 10, 2019 at 10:26 AM Ryan Stone <ryst...@gmail.com> wrote: >>>> >>>> rrs@ has just posted the BBR patch to phabricator: >>>> >>>> >>>> https://reviews.freebsd.org/D21582 >>>> >>>> >>>> ------ >>>> >>>> Randall Stewart >>>> >>>> r...@netflix.com >>>> >>>> >>>> >>>> >>>> >>>> ------ >>>> >>>> Randall Stewart >>>> >>>> r...@netflix.com >>>> >>>> >>>> >>>> >>>> >>>> ------ >>>> >>>> Randall Stewart >>>> >>>> r...@netflix.com >>>> >>>> >>>> >>>> >>>> >>>> ------ >>>> >>>> Randall Stewart >>>> >>>> r...@netflix.com >>>> >>>> >>>> >>>> >>>> >>>> ------ >>>> >>>> Randall Stewart >>>> >>>> r...@netflix.com >>>> >>>> >>>> >>>> >>>> >>>> ------ >>>> Randall Stewart >>>> r...@netflix.com >>>> >>>> >>>> >>>> >>> _______________________________________________ >>> freebsd-net@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-net >>> To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" > > ------ > Randall Stewart > r...@netflix.com > > > ------ Randall Stewart r...@netflix.com _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
