Sorry to say, but no. Nothing changed :( The iperf issue concerns me a bit also:
root@:/usr/home/asdf # iperf3 -c 172.31.16.126 iperf3: error - unable to receive control message: Connection reset by peer root@:/usr/home/asdf # iperf3 -c 172.31.16.126 Connecting to host 172.31.16.126, port 5201 iperf3: error - unable to initialize stream: Socket is not connected root@:/usr/home/asdf # iperf3 -c 172.31.16.126 ^C- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr iperf3: interrupt - the client has terminated root@:/usr/home/asdf # iperf3 -c 172.31.16.126 Connecting to host 172.31.16.126, port 5201 [ 5] local 172.31.16.125 port 23884 connected to 172.31.16.126 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 6.00 MBytes 50.2 Mbits/sec 217 1.43 KBytes [ 5] 1.00-2.00 sec 26.7 MBytes 224 Mbits/sec 566 1.43 KBytes [ 5] 2.00-3.00 sec 15.6 MBytes 131 Mbits/sec 445 1.43 KBytes [ 5] 3.00-4.00 sec 13.5 MBytes 113 Mbits/sec 453 1.43 KBytes [ 5] 4.00-5.00 sec 13.7 MBytes 115 Mbits/sec 512 1.43 KBytes [ 5] 5.00-6.00 sec 6.51 MBytes 54.6 Mbits/sec 201 1.43 KBytes [ 5] 6.00-7.00 sec 13.5 MBytes 114 Mbits/sec 366 1.43 KBytes [ 5] 7.00-8.00 sec 16.9 MBytes 142 Mbits/sec 325 1.43 KBytes [ 5] 8.00-9.00 sec 24.2 MBytes 203 Mbits/sec 275 1.43 KBytes [ 5] 9.00-10.00 sec 38.8 MBytes 325 Mbits/sec 277 1.43 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 175 MBytes 147 Mbits/sec 3637 sender [ 5] 0.00-10.00 sec 175 MBytes 147 Mbits/sec receiver iperf Done. root@:/usr/home/asdf # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- iperf3: error - unable to receive parameters from client: Connection reset by peer ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 172.31.16.125, port 21052 ^Ciperf3: interrupt - the server has terminated root@:/usr/home/asdf # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 172.31.16.125, port 29365 [ 5] local 172.31.16.126 port 5201 connected to 172.31.16.125 port 23884 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 5.85 MBytes 49.0 Mbits/sec [ 5] 1.00-2.00 sec 26.6 MBytes 223 Mbits/sec [ 5] 2.00-3.00 sec 15.6 MBytes 131 Mbits/sec [ 5] 3.00-4.00 sec 13.5 MBytes 113 Mbits/sec [ 5] 4.00-5.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 5.00-6.00 sec 6.51 MBytes 54.6 Mbits/sec [ 5] 6.00-7.00 sec 13.5 MBytes 114 Mbits/sec [ 5] 7.00-8.00 sec 16.9 MBytes 142 Mbits/sec [ 5] 8.00-9.00 sec 24.1 MBytes 202 Mbits/sec [ 5] 9.00-10.00 sec 38.8 MBytes 325 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 175 MBytes 147 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Den ons 26 juni 2019 kl 12:36 skrev Eugene Grosbein <eu...@grosbein.net>: > 26.06.2019 17:26, Christian M wrote: > > > I ran ifconfig xn0 -txcsum on both test VM's, and all incorrect checksum > disappeared. > > [skip] > > Data looks good. Did it run better this time? > > _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"