On Sat, Jun 15, 2019 at 12:54 AM Ronald F. Guilmette <r...@tristatelogic.com> wrote:
> I've recently completed a long overdue upgrade from FreeBSD 9.1 to > 12.0. And when I say "completed" that isn't 100% accurate, as there > are still a couple of remaining things I can't quite seem to make > work properly. > > Both of these, perhaps coincidentally, have to do with the magic > name "localhost". > > I can't for the life of me figure out what I've done wrong so I am > asking for help. > > First I should probably explain where I have been already, as that > may help to shed light on the problem. > > I installed and configured my new 12.0 system on a different (Intel- > based) machine at first. Got almost everything I need installed and > working on that hardware before, as a last step, pulling the hard > drive out of that system and sticking in into the AMD-based system > which will be its final home. Two things that definitely worked > before I swapped the hard drive to its new home were the Firefox and > Opera browsers. (I know. I checked.) > > Once I had the drive installed on the AMD system, I had to make a > small diddle to /etc/rc.conf to enable the AMD Kernel Mode Switching > graphics driver. But other than that, everything remained pretty > much as it was. The only other thing I did was to tun on ipfw. > It took me awhile to get my ipfw rules all the way I want them, > but now everything is running peachey again... > > ... except for the browsers, and also one other thing (nmh outbound > email handling). Now, both Firefox and Opera crash and burn, right > out of the gate, when started from the command line. In both cases > thet do so both with entirely cryptic failure messages. > > But here's the kicker... I futzed around with this awhile and found > out that if I just change the default value of the DISPLAY environment > variable from "localhost:0.0" to ":0.0" then both browsers *do* then > start up successfully from the command line. > > So, um, what the bleep did I do wrong? > > Here's the output of the command "getent hosts localhost": > > ::1 localhost > 127.0.0.1 localhost localhost.tristatelogic.com > > > Any hints for how I can debug this mess would be appreciated. > Do you have local_unbound running? It's probably caching the result. /etc/rc.d/local_unbound stop Then try your changes to /etc/hosts fwiw, the default ipv6 line matches the ipv4 short then fqdn. -- Adam _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
