Hi,
i still can’t get it to work.
My rc.conf looks like this:
defaultrouter="10.0.3.1"
ifconfig_igb0="inet 10.0.3.11/24 -rxcsum -rxcsum6 -txcsum -txcsum6 -lro -tso
-vlanhwtso"
ifconfig_igb1="up -rxcsum -rxcsum6 -txcsum -txcsum6 -lro -tso -vlanhwtso"
cloned_interfaces="vlan30 vlan40 vlan50 vlan60"
ifconfig_vlan30="inet 10.0.3.12/24 vlan 30 vlandev igb1 description LAN"
ifconfig_vlan40="inet 10.0.4.12/24 vlan 40 vlandev igb1 description IoT"
ifconfig_vlan50="inet 10.0.5.12/24 vlan 50 vlandev igb1 description Guest"
ifconfig_vlan60="inet 10.0.6.12/24 vlan 60 vlandev igb1 description VOIP“
ifconfig says:
# ifconfig
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8100b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER>
ether ac:1f:6b:63:37:b0
inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8100b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER>
ether ac:1f:6b:63:37:b1
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vlan30: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: LAN
ether ac:1f:6b:63:37:b1
inet 10.0.3.12 netmask 0xffffff00 broadcast 10.0.3.255
groups: vlan
vlan: 30 vlanpcp: 0 parent interface: igb1
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
vlan40: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: IoT
ether ac:1f:6b:63:37:b1
inet 10.0.4.12 netmask 0xffffff00 broadcast 10.0.4.255
groups: vlan
vlan: 40 vlanpcp: 0 parent interface: igb1
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
vlan50: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: Guest
ether ac:1f:6b:63:37:b1
inet 10.0.5.12 netmask 0xffffff00 broadcast 10.0.5.255
groups: vlan
vlan: 50 vlanpcp: 0 parent interface: igb1
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
vlan60: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: VOIP
ether ac:1f:6b:63:37:b1
inet 10.0.6.12 netmask 0xffffff00 broadcast 10.0.6.255
groups: vlan
vlan: 60 vlanpcp: 0 parent interface: igb1
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
When I try to bring up a jail on a freshly installed iocage it quits with an
error.
# iocage create -n "vlantest" -r LATEST defaultrouter="10.0.6.1" vnet="on"
allow_raw_sockets="1" boot="on" interfaces="vnet0:vlan60"
ip4_addr="vnet0|10.0.6.13/24"
vlantest successfully created!
* Starting vlantest
+ Started OK
+ Using devfs_ruleset: 5
+ Configuring VNET FAILED
ifconfig: BRDGADD vnet0.5: Invalid argument
Stopped vlantest due to VNET failure
What am I doning wrong?
Best regards,
Chris
--
E-Mail: ch...@debilux.org
Web: https://christianbaer.me
> Am 14.05.2019 um 09:01 schrieb Patrick M. Hausen <hau...@punkt.de>:
>
> Hi!
>
> Not tested, minor typos possible ...
>
>> Am 10.05.2019 um 23:02 schrieb Christian Baer <ch...@debilux.org>:
>> ifconfig_igb1="inet 10.0.3.12/24 -rxcsum -rxcsum6 -txcsum -txcsum6 -lro -tso
>> -vlanhwtso"
>> ifconfig_igb1_ipv6="inet6 accept_rtadv -lro -tso“
>> [...]
>> What's the proper way to set up igb1 to be untagged (and so be in the
>> management vlan) and create the different VLANs on it and use it with the
>> jails? On of the VLANs should also be in the management VLAN (to move my
>> Unifi controller from a Pi to a jail).
>
> ifconfig_igb1=“up -rxcsum -rxcsum6 -txcsum -txcsum6 -lro -tso -vlanhwtso“
> cloned_interfaces="vlan3 vlan4“
>
> ifconfig_vlan3="inet 10.0.3.12/24 vlan 3 vlandev igb1“
> ifconfig_vlan4="inet 10.0.4.12/24 vlan 4 vlandev igb1“
>
> iocage set vlan3jail interfaces="vnet0:vlan3"
> iocage set vlan3jail ip4_addr="vnet0|10.0.3.13/24"
>
> iocage set vlan4jail interfaces="vnet0:vlan4"
> iocage set vlan4jail ip4_addr="vnet0|10.0.4.13/24"
>
> HTH,
> Patrick
> --
> punkt.de GmbH Internet - Dienstleistungen - Beratung
> Kaiserallee 13a Tel.: 0721 9109-0 Fax: -100
> 76133 Karlsruhe i...@punkt.de http://punkt.de
> AG Mannheim 108285 Gf: Juergen Egeling
>
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
