https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221919
--- Comment #20 from Peter Eriksson <peter.x.eriks...@liu.se> --- Just a quick note that we're still seeing the same problem on our production servers if we enable "tso" on the 10G interfaces. FreeBSD 11.2-RELEASE-p6. Haven't been able to reproduce it on the test servers (identical hardware) running 11.2-RELEASE-p5 (and 12-0-RELEASE) so far though (but they don't see any traffic)... Driver version: > dev.ixl.0.%desc: Intel(R) Ethernet Connection 700 Series PF Driver, Version - > 1.9.9-k Firmware: > dev.ixl.0.fw_version: fw 6.80.48812 api 1.7 nvm 6.00 etid 80003751 oem > 18.4608.17 Watch Events in the output from sysctl -a > dev.ixl.0.watchdog_events: 4 Dmesg errors: > ixl0: WARNING: queue 3 appears to be hung! > ixl0: WARNING: queue 2 appears to be hung! > ixl2: WARNING: queue 2 appears to be hung! > ixl2: WARNING: queue 4 appears to be hung! > ixl2: WARNING: queue 7 appears to be hung! > ixl2: WARNING: queue 3 appears to be hung! > ixl0: WARNING: queue 7 appears to be hung! > ixl2: WARNING: queue 3 appears to be hung! > ixl0: WARNING: queue 4 appears to be hung! (Output from ifconfig with TSO disabled) > # ifconfig lagg0 > lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > > options=6404bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 3c:fd:fe:25:47:a0 > inet6 fe80::3efd:feff:fe25:47a0%lagg0 prefixlen 64 scopeid 0xa > inet6 2001:6b0:17:2400::8:43 prefixlen 64 > inet 130.236.8.43 netmask 0xffffffe0 broadcast 130.236.8.63 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > media: Ethernet autoselect > status: active > groups: lagg > laggproto lacp lagghash l2,l3,l4 > laggport: ixl0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> > laggport: ixl2 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> iperf3 output with TSO disabled: > # iperf3 -c filur00 -t4 > Connecting to host filur00, port 5201 > [ 5] local 2001:6b0:17:2400::8:43 port 51226 connected to > 2001:6b0:17:2400::8:40 port 5201 > [ ID] Interval Transfer Bitrate Retr Cwnd > [ 5] 0.00-1.00 sec 318 MBytes 2.66 Gbits/sec 0 561 KBytes > [ 5] 1.00-2.00 sec 350 MBytes 2.94 Gbits/sec 0 1.11 MBytes > [ 5] 2.00-3.00 sec 392 MBytes 3.28 Gbits/sec 0 1.67 MBytes > [ 5] 3.00-4.00 sec 351 MBytes 2.94 Gbits/sec 0 1.77 MBytes > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate Retr > [ 5] 0.00-4.00 sec 1.38 GBytes 2.95 Gbits/sec 0 sender > [ 5] 0.00-4.00 sec 1.38 GBytes 2.95 Gbits/sec receiver > > iperf Done. With TSO enabled (when things work): > # ifconfig lagg0 tso ; iperf3 -c filur00 -t4 > Connecting to host filur00, port 5201 > [ 5] local 2001:6b0:17:2400::8:43 port 51237 connected to > 2001:6b0:17:2400::8:40 port 5201 > [ ID] Interval Transfer Bitrate Retr Cwnd > [ 5] 0.00-1.00 sec 976 MBytes 8.19 Gbits/sec 0 492 KBytes > [ 5] 1.00-2.00 sec 1.08 GBytes 9.29 Gbits/sec 0 1021 KBytes > [ 5] 2.00-3.00 sec 1.08 GBytes 9.29 Gbits/sec 0 1.50 MBytes > [ 5] 3.00-4.00 sec 1.08 GBytes 9.28 Gbits/sec 0 1.75 MBytes > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate Retr > [ 5] 0.00-4.00 sec 4.20 GBytes 9.01 Gbits/sec 0 sender > [ 5] 0.00-4.00 sec 4.19 GBytes 9.01 Gbits/sec receiver > > iperf Done. But often queues get stuck and freezes. Hmm.. I just noticed that it was IPv6 that stopped working when I tried to enable it on a production server and ran iperf3 on it - IPv4 traffic was still passing thru. Can it be that there still are IPv6 (TSO6)-related bugs and that the IPv4 ones are solved? Too bad I can't find a way to force it to happen on the test servers... -- You are receiving this mail because: You are on the CC list for the bug. _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
