https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221146
Maciej Suszko <mac...@suszko.eu> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |mac...@suszko.eu
--- Comment #23 from Maciej Suszko <mac...@suszko.eu> ---
Same problem here on Dell PowerEdge R740xd running 11.2-RELEASE-p4, sources
modified to include latest mrsas drviers (DELL PERC H740P).
root@host:~ # uname -a
FreeBSD host 11.2-RELEASE-p4 FreeBSD 11.2-RELEASE-p4 #0 r338999M: Fri Sep 28
19:27:30 UTC 2018 root@host:/usr/obj/usr/src/sys/GENERIC amd64
root@host:~ # dmesg -a| grep '^ix[01]'
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port
0x4020-0x403f mem 0x9d900000-0x9d9fffff,0x9da04000-0x9da07fff at device 0.0
numa-domain 0 on pci5
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: xx:xx:xx:xx:xx:98
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port
0x4000-0x401f mem 0x9d800000-0x9d8fffff,0x9da00000-0x9da03fff at device 0.1
numa-domain 0 on pci5
ix1: Using MSI-X interrupts with 9 vectors
ix1: Ethernet address: xx:xx:xx:xx:xx:9a
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
ix0: link state changed to UP
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ix1: link state changed to UP
ix1: link state changed to DOWN
ix1: link state changed to UP
I can attach ix1 to lagg0 later, after system boot... doing this within rc.conf
(in pair with ix0) does not work, ix1 shows 'no carrier' and it doesn't change
it's state after removing from lagg0, interface down/up.
root@host:~ # ifconfig ix0
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether xx:xx:xx:xx:xx:98
hwaddr xx:xx:xx:xx:xx:98
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-Twinax
<full-duplex,rxpause,txpause>)
status: active
root@host:~ # ifconfig ix1
ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether xx:xx:xx:xx:xx:98
hwaddr xx:xx:xx:xx:xx:9a
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-Twinax
<full-duplex,rxpause,txpause>)
status: active
root@host:~ # ifconfig lagg0
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether xx:xx:xx:xx:xx:98
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
groups: lagg
laggproto lacp lagghash l2,l3,l4
laggport: ix0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
laggport: ix1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
