https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=228302
--- Comment #13 from sandreas <andreas.schro...@gmail.com> ---
> Try `ifconfig igb0 up wol` to add "up" option.
No change...
root@nas:~ # ifconfig igb0 up wol
root@nas:~ # ifconfig igb0
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether xxx
hwaddr xxx
inet 192.168.8.9 netmask 0xffffff00 broadcast 192.168.8.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
> How about do the LEDs of LAN ports operate at power-down state?
i use: shutdown -p now
leds are off... see here: https://abload.de/img/dsc06115a7utj.jpg
> When your system boots, do you get an ethernet card option ROM prompt?
No, nothing special i saw but I'll re-check this tomorrow
Another thing: BIOS Update did not change anything, i'm on 2.60 (latest) now.
Things left to try:
- Compile Kernel with patch (take some days to set up everything for this, not
much time atm)
- Look for an ethernet card option ROM prompt
If there is something else left, i would appreciate comments.
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-net@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
