On Tue, Mar 21, 2017 at 5:26 AM, Özkan KIRIK <ozkan.ki...@gmail.com> wrote:
> Hello, > > I sent this email also to freebsd-pf list. But I think that the main > problem is belongs to sys/net/if_epair.c. > > I'm using FreeBSD 10.3-p17 amd64. epair pseudo device is listed as > supperted deviced at the Man page of altq(4). > From man page of altq : > > *SUPPORTED DEVICES <https://www.freebsd.org/cgi/man.cgi?query=altq#end>* > > The driver modifications described in altq(9) > <https://www.freebsd.org/cgi/man.cgi?query=altq&sektion=9&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports> > are required to use a cer- > tain network card with *ALTQ*. They have been applied to the > following > hardware drivers: ae(4) > <https://www.freebsd.org/cgi/man.cgi?query=ae&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > age(4) <https://www.freebsd.org/cgi/man.cgi?query=age&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > alc(4) <https://www.freebsd.org/cgi/man.cgi?query=alc&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > ale(4) <https://www.freebsd.org/cgi/man.cgi?query=ale&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > an(4) <https://www.freebsd.org/cgi/man.cgi?query=an&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > ath(4) <https://www.freebsd.org/cgi/man.cgi?query=ath&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > aue(4) <https://www.freebsd.org/cgi/man.cgi?query=aue&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > axe(4) <https://www.freebsd.org/cgi/man.cgi?query=axe&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > bce(4) <https://www.freebsd.org/cgi/man.cgi?query=bce&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > bfe(4) <https://www.freebsd.org/cgi/man.cgi?query=bfe&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > bge(4) <https://www.freebsd.org/cgi/man.cgi?query=bge&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > bxe(4) <https://www.freebsd.org/cgi/man.cgi?query=bxe&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > cas(4) <https://www.freebsd.org/cgi/man.cgi?query=cas&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > cxgbe(4) <https://www.freebsd.org/cgi/man.cgi?query=cxgbe&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > dc(4) <https://www.freebsd.org/cgi/man.cgi?query=dc&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > de(4) <https://www.freebsd.org/cgi/man.cgi?query=de&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > ed(4) <https://www.freebsd.org/cgi/man.cgi?query=ed&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > em(4) <https://www.freebsd.org/cgi/man.cgi?query=em&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > ep(4) <https://www.freebsd.org/cgi/man.cgi?query=ep&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > epair(4) <https://www.freebsd.org/cgi/man.cgi?query=epair&sektion=4&; > apropos=0&manpath=FreeBSD+11.0-RELEASE+and+Ports>, > .... > > But while trying to use it the system says that it's not suppoerted. I > tried on FreeBSD 11 also. The output is below: > > pf.conf : > altq on epair0b hfsc bandwidth 1Mb queue { ftp, ssh, icmp, other } > queue ftp bandwidth 30% priority 0 hfsc (upperlimit 99%) > queue ssh bandwidth 30% priority 2 hfsc (upperlimit 99%) > queue icmp bandwidth 10% priority 2 hfsc (upperlimit 99%) > queue other bandwidth 30% priority 1 hfsc (default upperlimit 99%) > > > # ifconfig epair0 create > # ifconfig epair0a up > # ifconfig epair0b up > # pfctl -f pf.conf > pfctl: epair0b: driver does not support altq > > # sysctl -a | grep ALTQ > options ALTQ_NOPCC > options ALTQ_PRIQ > options ALTQ_CDNR > options ALTQ_HFSC > options ALTQ_RIO > options ALTQ_RED > options ALTQ_CBQ > options ALTQ > > > I have a look on /usr/src/sys/net/if_epair.c, and found the ALTQ section: > > 514 #ifdef ALTQ > 515 /* Support ALTQ via the clasic if_start() path. */ > 516 IF_LOCK(&ifp->if_snd); > 517 if (ALTQ_IS_ENABLED(&ifp->if_snd)) { > 518 ALTQ_ENQUEUE(&ifp->if_snd, m, NULL, error); > 519 if (error) > 520 ifp->if_snd.ifq_drops++; > 521 IF_UNLOCK(&ifp->if_snd); > 522 if (!error) { > 523 ifp->if_obytes += len; > 524 if (mflags & (M_BCAST|M_MCAST)) > 525 ifp->if_omcasts++; > 526 > 527 if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) == > 0) > 528 epair_start_locked(ifp); > 529 else > 530 (void)epair_add_ifp_for_ > draining(ifp); > 531 } > 532 return (error); > 533 } > 534 IF_UNLOCK(&ifp->if_snd); > 535 #endif > > Just apply manually this patch to make it work. diff --git a/sys/net/if_epair.c b/sys/net/if_epair.c index 540f06c..04733a5 100644 --- a/sys/net/if_epair.c +++ b/sys/net/if_epair.c @@ -827,9 +827,11 @@ epair_clone_create(struct if_clone *ifc, char *name, size_t len, caddr_t params) ifp->if_capabilities = IFCAP_VLAN_MTU; ifp->if_capenable = IFCAP_VLAN_MTU; ifp->if_start = epair_start; + if_setstartfn(ifp, epair_start); + if_setsendqlen(ifp, ifqmaxlen); + if_setsendqready(ifp); ifp->if_ioctl = epair_ioctl; ifp->if_init = epair_init; - ifp->if_snd.ifq_maxlen = ifqmaxlen; /* Assign a hopefully unique, locally administered etheraddr. */ eaddr[0] = 0x02; eaddr[3] = (ifp->if_index >> 8) & 0xff; @@ -852,10 +854,11 @@ epair_clone_create(struct if_clone *ifc, char *name, size_t len, caddr_t params) ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_capabilities = IFCAP_VLAN_MTU; ifp->if_capenable = IFCAP_VLAN_MTU; - ifp->if_start = epair_start; + if_setstartfn(ifp, epair_start); + if_setsendqlen(ifp, ifqmaxlen); + if_setsendqready(ifp); ifp->if_ioctl = epair_ioctl; ifp->if_init = epair_init; - ifp->if_snd.ifq_maxlen = ifqmaxlen; /* We need to play some tricks here for the second interface. */ strlcpy(name, epairname, len); error = if_clone_create(name, len, (caddr_t)scb); > I have no idea that why it says that it doesn't support altq altough the > source code contains ALTQ section. > > > Regards > Özkan KIRIK > _______________________________________________ > freebsd-net@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" -- Ermal _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
