Hello again, thanks a lot for you reply.
On 08.01.2017 22:57, Mark Martinec wrote: > 2017-01-08 20:33, diffusae wrote: >> Hi! >> >> I am looking for an compatible USB2Gigabit ethernet adapter for a RPi. >> That should work with the ISO Images of FreeBSD 11 stable (armv6). >> >> Do you have any suggestions? > > Raspberry Pi model 3 B and its predecessors only have USB 2.0 (not 3.0), > which (according to Wikipedia) only goes up to about 280 Mbit/s, > so an adapter to a gigabit ethernet is not particularly useful. > > You are not the only one to regret that RPi 3 did not introduce > a proper Gb ethernet interface. > > Mark Yes, I know this and it's a pity. You're right, it isn't really useful. But I also have a Linux Box (RPi 2) with a Gigabit WLAN Interface. It has a bandwidth about 200 Mbit/s or more, this is a bit higher than the internal USB NIC (100 Mbit/s). Especially if you stream HD videos, you could measure this difference. So, I only like to know which gigabit ethernet USB NIC would work with FreeBSD 11 and the Raspberry Pi? Thanks again Regards, Reiner _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
