If I start freeradius under high load, packets doesn't reach the destination - on sender side I see packets passing out (with tcpdump), on receiver side tcpdump "see" only part of these packets - some of them are missing.
> On 20 Mar 2015, at 11:49, Olivier Cochard-Labbé <oliv...@cochard.me> wrote: > > On Fri, Mar 20, 2015 at 10:23 AM, Vaidas Damoševičius <v...@par.lt > <mailto:v...@par.lt>> wrote: > Hello, > > Hi, > > > I have 2 boxes with FreeBSD 10.1-RELEASE/amd64 and "Intel(R) PRO/1000 Network > Connection 7.4.2" NIC's directly connected to each other. I noticed strange > problem - I'm loosing small UDP packets under high load. I've tried to test > it with iperf and got the following: > > --- > > vd@v0s4:~ % iperf3 -u -c 1.2.3.4 > Connecting to host 1.2.3.4, port 5201 > [ 4] local 1.2.3.3 port 64254 connected to 1.2.3.4 port 5201 > [ ID] Interval Transfer Bandwidth Total Datagrams > [ 4] 0.00-1.01 sec 120 KBytes 976 Kbits/sec 15 > [ 4] 1.01-2.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 2.01-3.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 3.01-4.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 4.01-5.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 5.01-6.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 6.01-7.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 7.01-8.00 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 8.00-9.01 sec 128 KBytes 1.05 Mbits/sec 16 > [ 4] 9.01-10.01 sec 128 KBytes 1.05 Mbits/sec 16 > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bandwidth Jitter Lost/Total > Datagrams > [ 4] 0.00-10.01 sec 1.24 MBytes 1.04 Mbits/sec 0.325 ms 0/159 (0%) > [ 4] Sent 159 datagrams > > > > The result display a Lost/Total ratio of 0/159: Where do you see missing UDP > packets ? > By default iperf send only 1 Mbit/sec in UDP mode: I didn't see any problem > on these stats. > > Regards, > > Olivier > > > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
