I think I'd go along with Mike, keeping it simpler seems like a good idea. Jack
On Fri, Dec 12, 2014 at 6:39 AM, Mike Karels <m...@karels.net> wrote: > > > Any other thoughts, or should I start looking at seeing what I can take > > copy from net80211? > > > Also adding -net, since this is pretty relevant. > > I had the same reaction as Adrian initially, as an int with numerous fields > seems really messy. However, I don't think we have the challenges of > 802.11, > and the only real problem is that the subtype field has run out of bits. > And both ifconfig and the drivers are cast in the form of a scalar "media > word", with parameters to ifmedia_add like IFM_ETHER | IFM_1000_T | IFM_FDX > (assuming that all the bits are in a scalar). > > Instead, I would propose that we simply change the media word from 32 bits > to 64, and move the subtype from its current location to a new field (e.g. > 16 bits) in the new space. I believe this can be KPI compatible, and it > is relatively easy to provide a backward-compatible ABI. There should be > a reserved subtype for "other" that can be encoded in the existing field > for use when the subtype can't fit in the old field. This seems much > easier, > can be KPI compatible, and will make it much easier to backport drivers. > A backport could simply define the new subtypes as "other", and the KPI > would still be compatible. > > Thoughts? > > Mike > > > On Tue, Dec 9, 2014 at 10:40 AM, Adrian Chadd <adr...@freebsd.org> > wrote: > > > > > > On 9 December 2014 at 07:27, Rui Paulo <rpa...@me.com> wrote: > > > > On Dec 9, 2014, at 01:05, Eric Joyner <e...@erj.cc> wrote: > > > >> > > > >> This is a continuation of a discussion from off the list: > > > >> > > > >> ixgbe needs to support devices with media types that aren't in > > > if_media.h; > > > >> for now those are 10GBaseKR, 10GBaseKX4, and 1000baseKX. > Immediately, > > > we're > > > >> running into the issue that there is no room for all of these types > > > under > > > >> the IFM_ETHER category; there's only room for two more (and per John > > > >> Baldwin, only one more if one of those two unused types is to be > used > > > for a > > > >> reserved type). Long term, there are going to be tons of media > types for > > > >> future ethernet speeds like 25G, 50G, 100G, and etc, and ixl already > > > >> supports media types that aren't in if_media.h, either. > > > >> > > > >> So, something needs to change. Does anyone have any thoughts on what > > > should > > > >> happen? I've thought of a few things, but I don't have an adequate > > > grasp of > > > >> what the pros/cons of each are: > > > >> > > > >> 1. Add a new media category (like IFM_ETHER) and change kernel code > to > > > >> treat it like the existing IFM_ETHER. This creates ~28 new media > types > > > we > > > >> can use, but it may just be delaying the inevitable for a short > time. > > > >> > > > >> 2. Extend media value from 32-bits to 64-bits. I don't have a good > idea > > > of > > > >> what the consequences are of this on architectures that aren't > amd64. > > > >> > > > >> 3. (Initially suggested by Adrian) would be to create a new media > type > > > >> struct (instead of using an int value) or adding an extra value to > the > > > >> existing ifmedia/ifmedia_entry struct for this. This sounds like the > > > best > > > >> solution to me, but I don't know how much effort it would take to > > > implement > > > >> -- does ifconfig need a lot of changing to handle this? > > > > > > > > ifconfig is a macro-intensive application, so maybe it's not that > much > > > work. > > > > > > > >> Thoughts? Any previous discussions worth looking at? > > > > > > > > Hmm, it looks like you're limited in the number of bits because of > how > > > the word was laid out. We can't simple remove token ring and get more > bits > > > for ethernet... We could create another IFM_40GETHERNET type to > replace > > > token ring but that would be ugly (the IFM_TYPE() macro could handle > this > > > idiosyncrasy). > > > > > > > > I think if_media should probably be a structure with unions to store > the > > > subtypes. net80211 has the same problem with MCS rates and we ended up > > > storing them outside if_media because of this. > > > > > > I think solving this like how it's done in net80211 (ie, with an > > > external structure that represents the media type details for a given > > > media) is the right thing to do. > > > > > > Otherwise it'll be a path to madness in the future. > > > > > > The net80211 side of things is mostly extensible and I'm going to > > > (eventually) end up using it for the 11ac rates that have shown up. I > > > couldn't do that whilst trying to cram it into the existing ifmedia > > > variable. > > > > > > > > > -adrian > > > > > _______________________________________________ > > freebsd-a...@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-arch > > To unsubscribe, send any mail to "freebsd-arch-unsubscr...@freebsd.org" > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
