On Wed, Jul 31, 2013 at 03:54:06PM +0900, Hiroki Sato wrote: > [Added yougari@ and davidch@ to the To:/Cc: list] > > I confirmed that my issue reported on -current@ is due to the bxe(4) > driver (BCM57711). If it is disabled, shutdown works fine without > NMI. > > Also, I received several reports about the same box that NMI occurred > even on bge(4) (BCM5717) driver when probing during power-cycle test. > The probability was about once per 30 power-cycles. Once it > occurred, an AC on/off cycle was required (resetting a system > reproduced the NMI in the same timing). >
Hmm, Hiroki, could you add bge_reset()/bge_chipinit() after bge_stop() in bge_shutdown() and let me know whether that change makes any difference? > Sean Bruno <sean_br...@yahoo.com> wrote > in <1375208841.1496.3.camel@localhost>: > > se> > se> > se> > http://svnweb.freebsd.org/base?view=revision&revision=236216 > se> > > se> > > se> > se> > se> Ok, confirmed after ~50 reboots. > se> > se> There is a timing problem in this revision that I don't fully > se> understand. Adding printf's inside bce_reset() will cause the existing > se> code to succeed, and sometimes the existing code in this revision will > se> work (about 10% of the time). > se> > se> In the failure mode, the network interface, bce0, will not come up into > se> service *without* and network restart, after which it works fine. > se> > se> I suspect that we are missing a DELAY or UDELAY somewhere in the > se> restoral of the emac_status settings that needs to be implemented. > se> > se> Sean > se> > se> p.s. sorry for the late report as the commit is well over a year old. _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
