Hi.
I use FreeBSD 9.1 with OFED compiled on it.
There is a Mellanox adapter:
[root@qa-h-vrt-030-006 ~]# pciconf -lv |grep mlx4 -A 3
mlx4_core0@pci0:0:5:0: class=0x028000 card=0x005015b3 chip=0x100315b3 rev=0x00
hdr=0x00
vendor = 'Mellanox Technologies'
device = 'MT27500 Family [ConnectX-3]'
class = network
I want to create Bond on the two ports (ib0 and ib1) of this device:
[root@qa-h-vrt-030-006 ~]# ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
ether 00:50:56:23:1e:06
inet6 fe80::250:56ff:fe23:1e06%em0 prefixlen 64 scopeid 0x2
inet 10.195.30.6 netmask 0xffff0000 broadcast 10.195.255.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib0: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 65520
options=80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.48.fe.80.0.0.0.0.0.0.0.2.c9.0.1.0.d0.51
inet 11.195.30.1 netmask 0xffff0000 broadcast 11.195.255.255
inet6 fe80::250:56ff:fe23:1e06%ib0 prefixlen 64 scopeid 0x4
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ib1: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 65520
options=80018<VLAN_MTU,VLAN_HWTAGGING,LINKSTATE>
lladdr 80.0.0.49.fe.80.0.0.0.0.0.0.0.2.c9.0.1.0.d0.52
inet 12.195.30.1 netmask 0xffff0000 broadcast 12.195.255.255
inet6 fe80::250:56ff:fe23:1e06%ib1 prefixlen 64 scopeid 0x5
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
1. Is there "bond" in FreeBSD or its "Lagg"?
2. I tried to create this way, but failed:
[root@qa-h-vrt-030-006 ~]# ifconfig lagg0 create
root@qa-h-vrt-031-005 conf]# ifconfig lagg0 laggproto failover laggport ib0
laggport ib1
ifconfig: SIOCSLAGGPORT: Protocol not supported
Any ideas?
Is it supported on Infiniband ports?
Regards,
Alex Liptsin
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
