Joe Holden wrote:
YongHyeon PYUN wrote:
On Sat, Mar 17, 2012 at 03:18:19PM +0000, Joe Holden wrote:
Hi guys,
I've upgraded to 9.0-REL from RC3 (I think) and the previous
workarounds I've used for msk/Yukon II problems don't seem to work
anymore:
rc.conf:
ifconfig_msk0="inet 192.168.201.2/30 -lro -tso -vlanhwfilter -vlanhwtag"
msk(4) does not support VLAN hardware filter and LRO. However I
don't understand how this affects stability of driver.
pciconf:
mskc0@pci0:7:0:0: class=0x020000 card=0x81e6104d
chip=0x435111ab rev=0x15 hdr=0x00
vendor = 'Marvell Technology Group Ltd.'
device = '88E8036 PCI-E Fast Ethernet Controller'
class = network
subclass = ethernet
I seem to get the usual error:
msk0: watchdog timeout
msk0: prefetch unit stuck?
msk0: initialization failed: no memory for Rx buffers
There was a related change after 9.0-RELEASE. The change already
merged to stable/9(r229874) So would you try latest stable/9 or
apply the change to 9.0-RELEASE?
http://svnweb.freebsd.org/base/stable/9/sys/dev/msk/if_msk.c?r1=229524&r2=229874&view=patch
Well that's cute.... reboot during boot, no panic or errors on the
console ...
MSI(-X) is disabled but it doesn't seem to make any difference....
Is there anything I can try to either debug or "fix" it?
If you've upgraded from somewhat old FreeBSD releases, make sure to
cold boot your box(i.e. completely remove power cord for several
minutes before booting).
Thanks,
J
Ok so after removing sound from GENERIC it boots but the problem still
occurs - the flags I used before did work (whether some didn't have any
effect I don't know, but once I found a combination that prevented the
problem I left it at that)
Rather a concerning amount of regressions in 9...
Thanks,
J
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[email protected]"
