On Saturday 25 February 2012 22:47:50 Vlad Galu wrote: > > Hi > > > > You might need to add ipv6_default_interface="re0" to /etc/rc.conf. After > you do that, it will have ACCEPT_RTADV and DEFAULTIF set.
Thanks for informations. Ok - looks like FreeBSD still not have rc.conf variable for controlling net.inet6.ip6.accept_rtadv (ipv6_default_interface="re0") = ndp -I re0 But that in my case I have seen on netstat correct information about default gw for ipv6 - I should in /etc/rc.d/routing change string from ipv6_static_routes="default ${ipv6_static_routes}" to ipv6_static_routes="${ipv6_static_routes} default" And however I all the same can't achieve working configuration IPv6 from the boot. At present i have /etc/rc.conf related to ipv6: ipv6_activate_all_interfaces="YES" ipv6_static_routes="hetzner" ipv6_route_hetzner="2a01:4f8:61:50c0::/59 -iface re0" ipv6_default_interface="re0" ifconfig_re0_ipv6="inet6 2a01:4f8:61:50c2::13/64" ipv6_defaultrouter="2a01:4f8:61:50c0::1" rtadvd_enable="YES" rtadvd_interfaces="re0" /etc/sysct.conf: net.inet6.ip6.accept_rtadv=1 After reboot what i get: # sysctl -n net.inet6.ip6.accept_rtadv 1 # ndp -I ND default interface = re0 # route get -inet6 default route to: :: destination: :: mask: default gateway: 2a01:4f8:61:50c0::1 interface: re0 flags: <UP,GATEWAY,DONE,STATIC> recvpipe sendpipe ssthresh rtt,msec mtu weight expire 0 0 0 0 1500 1 0 # ping6 2a01:4f8:61:50c0::1 PING6(56=40+8+8 bytes) 2a01:4f8:61:50c2::13 --> 2a01:4f8:61:50c0::1 ping6: sendmsg: Operation not permitted ping6: wrote 2a01:4f8:61:50c0::1 16 chars, ret=-1 ^C --- 2a01:4f8:61:50c0::1 ping6 statistics --- 1 packets transmitted, 0 packets received, 100.0% packet loss ? It seems not a problem of configuration rc-scripts, something isn't perfectly in order with route table for -iface? _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"