> Hrm, the problem apparently is that while when probing, the PHY
> still knows about the media it supports, it just has forgotten
> about it after the reset during attach. There was a change prior
> to 8.2 which would turn this from silently being ignored (which
> generally might or might not work) into resulting what you see
> now (the upper layers arguably shouldn't trigger a panic in this
> case though). I can't remember a change to either bge(4) or
> brgphy(4) between 8.2 and now which could trigger this though.
> Have you tried to set the loader-tunable hw.bge.allow_asf to 0?
> The default for that option still is different between 8 and 9+.
it no longer panics when booting, but the interface comes up not seeing
carrier
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:30:48:82:11:a2
inet 198.180.150.1 netmask 0xffffff80 broadcast 198.180.150.127
inet6 fe80::230:48ff:fe82:11a2%bge0 prefixlen 64 scopeid 0x1
inet6 2001:418:8006::1 prefixlen 64
inet 198.180.150.2 netmask 0xffffffff broadcast 198.180.150.2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet 1000baseT (none)
status: no carrier
randy
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
