i made a little lab, all on 8.2-R: freebsd1-le0.10 (192.168.2.1) <=====> bridge0( le0.10 - freebsd2 - le1.10 ) <=====> le0.10(192.168.2.1) - freebsd3
freebsd2 is a "switch" it has no ip addresses assigned to interfaces (except localhost of course), "switch" is made by bridge0 interface which contain vlan interfaces le0.10 and le1.10. Ethernet segments freebsd1-freebsd2 and freebsd2-freebsd3 are different and not visible to each other. In this scheme i can ping 192.168.2.2 from 192.168.2.1 just fine, so if your question was "will bridge work without ip addresses", then answer is "yes". -- your sweet isn't ready yet On Mon, Dec 19, 2011 at 8:52 AM, saeedeh motlagh <saeedeh.motl...@gmail.com> wrote: > you're right but we can't assign tow parent interface to one vlan in freebsd > therefore i define two vlans with the one vlan id. > although we can do it by blow command but it's not work too: > ifconfig gbeth0.10 create > ifconfig msk0.10 create > ifconfig > gbeth0.10: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=3<RXCSUM,TXCSUM> > ether 00:27:0e:03:4b:2f > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > vlan: 10 parent interface: gbeth0 > msk0.10: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=100<TSO4> > ether 00:30:4f:63:5a:bc > media: Ethernet autoselect (none) > status: active > vlan: 10 parent interface: msk0 > > you know when i define vlans with ip addressess they work as i expected but > i want to know if i can define vlan without ip address as the switch beacuse > i wanna configure a freebsd box as a real switch in my network. maybe it's > impossible to do that :( > > > On Sun, Dec 18, 2011 at 10:52 PM, Alexander Lunev <sol...@gmail.com> wrote: >> >> first of all, you should name and number you vlan same, if it's clan10 >> on the one side, then it's vlan10 on the other side and in betweeen. >> then (though you have to do it first of all), you should understand >> how vlan's work, and after that connect ports to each other according >> to your scheme. >> >> >> -- >> your sweet isn't ready yet >> >> >> >> On Sun, Dec 18, 2011 at 10:01 AM, saeedeh motlagh >> <saeedeh.motl...@gmail.com> wrote: >> > i have 3 freebsd system: 0.28 , 0.25 and 0.12 which 28 is assumed to be >> > switch here. one interface of 28 is connected to 25 and the other >> > interface >> > of 28 is connected to 12. as mentioned below, i've defined two vlan10 >> > and >> > 11 with the same vlan id on the 28 and bridge them. >> > now i can't ping 0.25 from 0.12. what's wrong here? should i define >> > vlan10 >> > on 12 and 25? >> > please tell me if i'm misunderstanding. >> > this is the ifconfig for 0.28: >> > vlan10: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> >> > metric 0 >> > mtu 1500 >> > options=3<RXCSUM,TXCSUM> >> > ether 00:27:0e:03:4b:2f >> > media: Ethernet autoselect (1000baseT <full-duplex>) >> > status: active >> > vlan: 10 parent interface: gbeth0 >> > vlan11: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> >> > metric 0 >> > mtu 1500 >> > options=100<TSO4> >> > ether 00:30:4f:63:5a:bc >> > media: Ethernet autoselect (none) >> > status: active >> > vlan: 10 parent interface: msk0 >> > bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >> > 1500 >> > ether d6:c4:f6:0f:5e:4f >> > id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 >> > maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 >> > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 >> > member: vlan11 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> >> > ifmaxaddr 0 port 6 priority 128 path cost 55 >> > member: vlan10 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> >> > ifmaxaddr 0 port 5 priority 128 path cost 20000 >> > >> > >> > On Sat, Dec 17, 2011 at 8:47 PM, Alireza Torabi >> > <alireza.tor...@gmail.com>wrote: >> > >> >> َAlso it's a good idea to to attach a ifconfig output. >> >> >> >> On 12/17/11, saeedeh motlagh <saeedeh.motl...@gmail.com> wrote: >> >> > when i do that, the vlan is defined but from a system in a vlan, i >> >> > can't >> >> > ping the other one which is in the same vlan. so i think that the >> >> > vlan is >> >> > not working. am i right? >> >> > >> >> > On Sat, Dec 17, 2011 at 1:15 PM, Juli Mallett <jmall...@freebsd.org> >> >> wrote: >> >> > >> >> >> You probably just need to do ifconfig vlanxxx up instead of >> >> >> assigning an >> >> >> IP. >> >> >> >> >> >> On Sat, Dec 17, 2011 at 00:08, saeedeh motlagh >> >> >> <saeedeh.motl...@gmail.com> wrote: >> >> >> > hi every body >> >> >> > >> >> >> > i wanna configure a freebsd box as a switch. in order to do that, >> >> >> > i >> >> >> bridged >> >> >> > all my interfaces to have switching and it works fine. after that >> >> >> > i >> >> want >> >> >> to >> >> >> > have vlans on it. as you know, in a real switch, a vlan is >> >> >> > configured >> >> >> just >> >> >> > by assigning a port to it without any additional configuration and >> >> vlans >> >> >> > are submitted just by name. but in freebsd a vlan just works when >> >> >> > it >> >> has >> >> >> an >> >> >> > ip address (i think). when i define vlan121 on two freebsd systems >> >> with >> >> >> ip >> >> >> > address it works fine but without ip address i don't know how it >> >> should >> >> >> be >> >> >> > worked. >> >> >> > >> >> >> > can sombody tell me if it is possible to simulate vlans in freebsd >> >> >> > as >> >> >> they >> >> >> > are in a real switch? i mean can we have vlans without ip >> >> >> > addresses >> >> >> > which >> >> >> > works fine? maybe some kind of vlan which works by MAc address. is >> >> >> > it >> >> >> > possible? >> >> >> > it's so necessary for me to do that:( >> >> >> > >> >> >> > yours, >> >> >> > motlagh >> >> >> > _______________________________________________ >> >> >> > freebsd-net@freebsd.org mailing list >> >> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-net >> >> >> > To unsubscribe, send any mail to >> >> >> > "freebsd-net-unsubscr...@freebsd.org >> >> " >> >> >> >> >> > _______________________________________________ >> >> > freebsd-net@freebsd.org mailing list >> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-net >> >> > To unsubscribe, send any mail to >> >> > "freebsd-net-unsubscr...@freebsd.org" >> >> > >> >> >> > _______________________________________________ >> > freebsd-net@freebsd.org mailing list >> > http://lists.freebsd.org/mailman/listinfo/freebsd-net >> > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" > > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
