On Tuesday, December 07, 2010 5:17:30 pm Kim Culhan wrote: > Had been running a wireless bridge for some months in rc.conf: > > ifconfig_bridge0="addm wlan0 addm re1 up" > > Updated to 8.2-PRERELEASE 2 days ago and when the machine boots > the bridge has no members. > > Reversing the order of the members results in the bridge having just > the re1 member. > > Running the above command from a shell works and running from > an rc.local file also works. > > FWIW, running from a shell there is about a 3 second delay after hit enter > before it returns the shell prompt, members are then present. > > The lines in rc.conf: > > cloned_interfaces="bridge0" > ifconfig_wlan0="inet 192.168.1.50/24 channel 11" > wlans_rum0="wlan0" > create_args_wlan0="wlanmode hostap mode 11g" > ifconfig_bridge0="addm wlan0 addm re1 up" > > Tried replacing the re device with em, no change. > > Any help is very greatly appreciated.
Most likely the bridge0 device is created by /etc/rc.d/netif before the wlan0 device is created, so when the system startup tries to configure bridge0, the ifconfig statement fails. What does 'ifconfig -l' show after you have booted? -- John Baldwin _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
