Hello YongHyeon,
yes, booth Test-Servers are in idle State, no Disk activity and no
important Networktraffic.
the pciconf -lcbv for the Nics:
e...@pci0:7:1:0: class=0x020000 card=0x00db0e11 chip=0x10108086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = 'Dual Port Gigabit Ethernet Controller (Copper)
(82546EB)'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xfdfe0000, size 131072,
enabled
bar [18] = type Memory, range 64, base 0xfdf80000, size 262144,
enabled
bar [20] = type I/O Port, range 32, base 0x6000, size 64, enabled
cap 01[dc] = powerspec 2 supports D0 D3 current D0
cap 07[e4] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
transaction
cap 05[f0] = MSI supports 1 message, 64 bit
e...@pci0:7:1:1: class=0x020000 card=0x00db0e11 chip=0x10108086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = 'Dual Port Gigabit Ethernet Controller (Copper)
(82546EB)'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xfdf60000, size 131072,
enabled
bar [20] = type I/O Port, range 32, base 0x6040, size 64, enabled
cap 01[dc] = powerspec 2 supports D0 D3 current D0
cap 07[e4] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
transaction
cap 05[f0] = MSI supports 1 message, 64 bit
if you need more Info please ask me ;-)
thanks for your responce ré
On Thu, Nov 11, 2010 at 07:35:32PM +0000, r...@reckschwardt.de wrote:
Hello,
i am new in this Maillist and i use an ML370G4 with FreeBSD 8.1 AMD64. I
try with netio and TCP. The used Nics are onboard Broadcom
(PCI-X133Mhz), an Broadcom PCI-X Nic and an intel PCI-X Nic. The CPU
load is around 35% and the performance like this:
Packet size 1k bytes: 99303 KByte/s Tx, 44576 KByte/s Rx.
Packet size 2k bytes: 72043 KByte/s Tx, 75200 KByte/s Rx.
Packet size 4k bytes: 23280 KByte/s Tx, 66072 KByte/s Rx.
Packet size 8k bytes: 55234 KByte/s Tx, 64470 KByte/s Rx.
Packet size 16k bytes: 82485 KByte/s Tx, 74099 KByte/s Rx.
Packet size 32k bytes: 93133 KByte/s Tx, 74992 KByte/s Rx.
And you did perform the test on idle system?(No disk activity, no
other network IOs etc).
Show me the dmesg output of verbose boot and output of "pciconf
-lcbv".
I try the following tuning:
kern.ipc.maxsockbuf=16777216
net.inet.tcp.sendbuf_max=16777216
net.inet.tcp.recvbuf_max=16777216
net.inet.tcp.sendbuf_inc=16384
net.inet.tcp.recvbuf_inc=524288
net.inet.tcp.inflight.enable=0
net.inet.tcp.hostcache.expire=1
but this is not helpfull, the Load goes to 60% and the Performance is
also poor. How can i prevent this Problem?
thanks for response r?
P.S. the same Computer with Linux runs perfect with Performance and 1-2%
Load,
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
