I'm sending this out as an update to the net mailing list. The problem is that the PC running Windows XP was attempting DHCP on power up thru the bridge, and for some reason this fails in the 8.1 code, but the good news is its fixed in STABLE/8.
So, I would recommend going to the STABLE/8 e1000 code as a first step if you are having any problems with any of the 1G drivers. Jack On Tue, Aug 3, 2010 at 7:02 PM, Scott Johnson <scottj75...@yahoo.com> wrote: > Under 8.0-RELEASE I would get warnings from em(4) in /var/log/messages > about > > "watchdog timeouts" on em0 whenever my desktop PC connected to em0 was > powered > off. This was fine, except for the annoying warnings. > > Under 8.1-RELEASE I no longer get the warnings, and any time my desktop is > powered off, when I turn it back on, it has no connectivity. The interface > is > dead until I log into the console and run: > # ifconfig em0 down up > > The em(4) driver has changed a lot since 8.0-RELEASE. It seems this > watchdog > timeout is no longer working. > > The board is a Supermicro X7SPA-H with Intel 82574L GbE. > > Any ideas for debugging? > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org" > _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
